Jump to content

Log in or register to remove this advert

stump grinding incidents


bob
 Share

Recommended Posts

Log in or register to remove this advert

I used to use a Spearhead long reach flail for the guy i worked for before going self employed, i once managed to get a whole chainlink fence (that was rolled up and grown over) wrapped around the drum!!! was a total nightmare, bolt croppers and wire cutters would do nothin as it was so tight...but the gas axe worked a treat!:wave:

Link to comment
Share on other sites

was working for a LA a few years back and one roadside stump was due to be ground/grubbed out. Instead of goinf back to the yard and picking up a grinder a quick phone call (not me might I add!) was made and a 17 tonner plus hi-ab from another gang turned up as they were working nearby. The stump and area hadn't been surveyed and along with about 5 paving slabs a load of utilities popped up, BT, NTL, Electric etc. Bet the charge hand wished he had gone back to the yard...:scared:

Link to comment
Share on other sites

Done an elctric cable, luckily just to an outhouse, hit a gas pipe into a house and had a few car wheels wrapped aroud the drum of a mulcher head on a skidsteer.

My mate however whilst working at night driving an excavator mounted mulcher hit the ground and blasted railway balast accross an entire street putting out just about every window and totalling around £25k in damage. ouch.

Link to comment
Share on other sites

One of my pals nearly took his mate out whilst using a little david stump grinder with piece of shrapnel that came flying out the side of the engine. I recall a loud bang at the time lol:fisheye:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.