Jump to content

Log in or register to remove this advert

What's on your bench today?


spudulike

Recommended Posts

Log in or register to remove this advert

It has probably worn down but L&S engineers are pretty good on Stihl parts or try one of the sponsors on this site if you want to pick up the phone!

 

Mr Spud, thank you very much for getting the 372 back to me so quickly :) she seemed to run nicely for 4 tankfulls today :) bar and chain need some love though I think lol. Not sure if the 24s too big for it too...

 

Husky 395xp- broken clutch spring. What's best, just replace 1 spring, or 3? Does the clutch have to come off for this!? And where can I get some by the weekend!? Can't see them on LS engineers.

 

Thanks :)

Link to comment
Share on other sites

 

Husky 395xp- broken clutch spring. Can't see them on LS engineers.

 

Thanks :)

 

Search results for: '503 14' | L&S Engineers

 

Part number 503 14 51-01, think that is correct. checked 2 parts lists.

 

If I was replacing a spring I would do all three, but others may have different advice.

 

I always try to include preventative maintenance, if the bits are cheap.

 

H-A

Link to comment
Share on other sites

Search results for: '503 14' | L&S Engineers

 

Part number 503 14 51-01, think that is correct. checked 2 parts lists.

 

If I was replacing a spring I would do all three, but others may have different advice.

 

I always try to include preventative maintenance, if the bits are cheap.

 

H-A

 

Nice one! :) I saw those but said it was for partner saws not husky!

 

I'll get three ordered up :)

 

Thanks again,

Charlie.

Link to comment
Share on other sites

Just got the MS200T back together - one I am doing for resale.

 

The carb has had a full going over and the accelerator pump and a few other fixes applied. A light tuning has seen the compression rise dramatically - how does 200psi on a warm engine grab you??

 

Normally they pull 150 and possibly 170psi on a good one - looks like it may pull well on a 12":thumbup:

Link to comment
Share on other sites

how does 200psi on a warm engine grab you??

 

 

Sounds good, is that a cylinder base skim and popup piston.

 

Or "if you told me you would have to kill me":001_smile:

 

Is there any scope for cylinder modification, other than reducing height ?

 

H-A

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.