Jump to content

Log in or register to remove this advert

Rate My Hinge.


Frank
 Share

Recommended Posts

Doesnt look anywhere near 40" across:sneaky2:

 

Dont get into a habit of cutting buttresses off as one day you may need the wider hinge:thumbup1:

 

You still got another couple to scrutinise?

 

more like 20.1 inch or something lol just niped it off so i could cut it all from one side, as i didnt want to be moveing behind the tree on the steep banking. only had good place to stand on one side.

 

good point about not getting into that habit though :thumbup1:

 

the other fells werent worth taking pics off as were alot smaller.

Link to comment
Share on other sites

Log in or register to remove this advert

I've got into a habit of doing high gobs. Leaving a stump I then need to cut off. From doing site clearance and being asked to leave 50cm stumps for diggers to get hold of. It's ok for small stuff but when it's a bigger tree it's awkward to slice off because it want to sit down and pinch my saw. Although wedges to help

Link to comment
Share on other sites

I've got into a habit of doing high gobs. Leaving a stump I then need to cut off. From doing site clearance and being asked to leave 50cm stumps for diggers to get hold of. It's ok for small stuff but when it's a bigger tree it's awkward to slice off because it want to sit down and pinch my saw. Although wedges to help

 

stop halfway through and stick a twig or two in yer cut:thumbup: get them in right and you can use them as rollers instead of lifting it off, helps when you are chogging down big rings..

Link to comment
Share on other sites

Man with high stump has sharp chain!

 

Unless I'm felling for timber, I prefer a higher gob as well. Above the buttresses, unless you need the additional hold.

 

Good call with the single bar sweep with only one decent exit route Rob.

 

Having to do only one cut is better. As there's no pause between cutting incase it's a bit of a nasty wind or if the tree is rotten. Your only stopping when you hit the hinge. Not when you have to go round the other side and finish it off.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.