Recommend me a saw.

[J.D]

Evening men,

 

I'm off to do my CS30,31 in a couple of weeks and I need a bigger saw than my MS180, or so I have been told...

 

So recommend me something as I'm firstly unsure and then secondly not to keen on buying off of Flebay

 

 

 

Cheers

 

J.D

[tractorboy1]

ms260 is normally the saw of choice for that course

[Peter]

Stihl MS260

[liamjordan]

Depends how much bigger you want to go,

 

i would recommend a Stihl MS260 or maybe a Stihl MS361

[Mozza]

50ish cc id say, with a 15 inch bar, Stihl ms260 OR Husky 357xp, would do you perfectly.

 

Not wanting to start a stihl V husky thread again BUT id get the 357 myself

[Tree Man Tom]

A sachs dolmar 123 would suit you very well, and i just happen to know of one going cheap..

 

Doubt your assesor would be very happy if you rocked up with that bad boy though. I would reccomend a ms341 or 361 if you can afford it.

[liamjordan]

A sachs dolmar 123 would suit you very well, and i just happen to know of one going cheap..

 

Doubt your assesor would be very happy if you rocked up with that bad boy though. I would reccomend a ms341 or 361 if you can afford it.

how cheap? pm me if you want

[Frankie Lawrence]

husky 346 is the minimum size power saw etc I would recomend a 357 Im a husky man but not starting this all over again

[Frank]

Anything with a 15"bar. Stihl ms260 or husky 356. Sorted.

[swinny]

15" is the maximum guide bar length for that course. I did mine with a ms260 that the college provided and a 13" bar

 

 

hope it goes well