Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Hi All,  I'm looking for recommendations for a flail mower to go onto an Antonio Carrera Tigre 3800 (nominally 36Hp from memory).  It will mostly be for ride maintenance but I also have largish areas of sedge and light brush to clear as well.  I like the look of the Alpha Delta eco 135 but would be very interested to hear others opinions/ recommendations.

 

Cheers

 

Alan

Log in or register to remove this advert

Posted
55 minutes ago, Tree monkey 1682 said:

Got to be a flail and not a McConnell chain swipe/ jungle buster?

Flails can be good... can be shite especially if they come into contact with something hard ..

I second this. Twice as quick with a single rotor topper than a flail and in some fairly thick stuff too. Especially in thick non brassy stuff like long grass- that slows flails right down. 
 

runs great on reverse drive too. 

IMG_4721.jpeg

IMG_4457.jpeg

D0992655-4663-4E86-AA04-C55175B88C80.jpeg

Posted
21 minutes ago, doobin said:

I second this. Twice as quick with a single rotor topper than a flail and in some fairly thick stuff too. Especially in thick non brassy stuff like long grass- that slows flails right down. 
 

runs great on reverse drive too. 

IMG_4721.jpeg

IMG_4457.jpeg

D0992655-4663-4E86-AA04-C55175B88C80.jpeg

You also have reach to back under low branches, and backing up to ditch without ditching tractor. 

Posted

Plus a flail on anything that small will be like watching paint dry through a telescope.

 

Just buy a 4/5ft topper, most of us have gone Topper to flail and then regretted it, then gone back to a topper or the flail gathers dust.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.