Jump to content

Log in or register to remove this advert

Wood Store


Steven P
 Share

Recommended Posts

This is just a thought

The background is that I 'killed' my neighbours wood store over the weekend, it had a 30 degree lean to it, and piling next winters logs on it has given it a 90 degree lean now..... So a job for me next weekend....

 

My thought here, if I put some fine mesh at the ends of what I rebuild, would that be enough to stop most of the rain and yet still allow an air flow through. My guess is yes, if I get the right size?

Link to comment
Share on other sites

Log in or register to remove this advert

I season wood in a polytunnel, which has mesh covered windows. Usually it seasons well, but I often get drips / damp patches by the windows, especially on the upwind side. Depends on if your mesh is under some sort of roof I suppose, to keep direct rain from falling on the mesh?

Link to comment
Share on other sites

Hi, I've used scaffolding debris netting for this purpose, I hung it about 12" away from a 6' high covered log stack with no side protection... it worked well and heavy rain mostly ran down it and stayed off the stack, in good weather I could easily remove or roll it up.... It also comes in 3 meter widths if you needed that. 

 

A good big roll for £32👍

 

WWW.EBAY.CO.UK

Safe Net Green Shade Debris Scaffold Netting 2mtr x 50mtr. Though Debris Netting provides limited weather protection, it...

 

  • Like 3
Link to comment
Share on other sites

There's an agricultural product available called "Galebreaker" which is basically a weatherproof mesh.

 

I've used it in the past and it works well, but it is very fine and even then direct rain blown wind will still drip down on the inside, but doesn't get through any further.

 

Could be difficult to buy a commonly available commercial mesh to do a similar job though.

  • Like 1
Link to comment
Share on other sites

5 minutes ago, Steven P said:

That's what I was thinking, even if some water gets blown through, it is going to hold off a lot I reckon. I'll look for the recommendations. What sort of hole size is in the mesh? couple of mm?

 

I'd say that if you mean the scaffold debris netting and the Galebreaker which may be the same knitted product with probably  1/4" to 3/8" holes in the knit depending how tight you stretch it... at 32 squid it's a no brainer as it also has many other uses and won't degrade over a long time👍

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.