Logosol f2+

[Stuarts]

Check the round plastic wheels are good.
I’ve broken a couple.[emoji849]
Also yiu can’t use twine, you’ll need the proper Logosol stuff.
Trust me, I’ve tried about a dozen different polyprop strings, all broke.🤣[emoji106]
The logosol twine is incredibly strong.[emoji106]

The saw carriage is an optional extra,
I’d recommend one.
[emoji106]

I thought this was the saw carriage? How do you use it without it one...

[topchippyles]

1 minute ago, Stuarts said:

I thought this was the saw carriage? How do you use it without it one...

Normally comes with the saw mill but you will need that unless roughy knows better. That attaches to the chainsaw which then mounts onto the mill

[Big Beech]

17 hours ago, Rough Hewn said:

Spend a bit of time with a spirit level and right angle.
When it’s all setup, with a log on it.
Check everything again.
I had an issue with the raisers.
Need oiling occasionally, or they’d stick.
Have you seen the m7/m8 videos?
Loads of really useful stuff from Logosol

I can see this taking sometime to get things level on that top face....

 

[topchippyles]

12 minutes ago, Big Beech said:

I can see this taking sometime to get things level on that top face....

 

Can you put down a concrete pad 

[Big Beech]

3 minutes ago, topchippyles said:

Can you put down a concrete pad 

It will be on a cow yard concrete silage base.

Was poking about this afternoon but could see frustration levels and cold fingers getting the better of me...

So came inside for a warm snooze in front of the log burner 😅

[topchippyles]

23 minutes ago, Big Beech said:

It will be on a cow yard concrete silage base.

Was poking about this afternoon but could see frustration levels and cold fingers getting the better of me...

So came inside for a warm snooze in front of the log burner 😅

Take a few of those slabs up and put a level concrete pad down and bolt it to floor 

[Rough Hewn]

Two pieces of 4x2 laid down and levelled. [emoji106]
The log weight will hold it all in place.

The saw carriage is just a carriage.
That’s all I have. I push it with a stick.
The winder and bar tip holder are extras.

[Rough Hewn]

Don’t push the saw unit when millling! Or the AV will make the cut go to shit.
Only push the carriage [emoji106]

[topchippyles]

46 minutes ago, Rough Hewn said:

Two pieces of 4x2 laid down and levelled.
The log weight will hold it all in place.

The saw carriage is just a carriage.
That’s all I have. I push it with a stick.
The winder and bar tip holder are extras.

Come on saul a nice concreate pad if you have the place to do it is much better. Is that why they call you roughy 🤣 Sorry could not help myself 

[Rough Hewn]

Come on saul a nice concreate pad if you have the place to do it is much better. Is that why they call you roughy 🤣 Sorry could not help myself 

You’re learning.
[emoji106]