Jump to content

Log in or register to remove this advert

Bamboo.


David Cropper
 Share

Recommended Posts

In January I will be using the stump grinder to "scarify " dead bamboo stalks, done it a few times before,  quite effective,  then explain to the clients to constantly mow over any new growth. My problem is the bamboo is  growing next to and into the river, obviously treating with glysophate is out of the question. I've started killing weeds in my gravel drive,  60 metres long, with a flame wand using Calor gas. Brilliant job and of course doesn't harm the bees etc. I've searched briefly on the internet and using heat is generally advocated for killing bamboo. Health and Safety stipulates that any giant pandas or Japanese snipers are removed beforehand. Any thoughts? 

  • Like 1
  • Haha 1
Link to comment
Share on other sites

Log in or register to remove this advert

I've tried wood fires, charcoal fires and even dumped bags of coal on the stuff.
Bit like the terminator, kept coming back.
Couldn't even cut through the root mass, had to under cut 6'x6' x12" then ripped the whole slab up.
Cut it up with bow saws, as we'd already knackered a new bar and chain.
Watch out for toads etc we found loads hidden at the bases.
Nightmare stuff.

  • Like 2
Link to comment
Share on other sites

I’ve had a few tricky bamboo removal jobs I have found glysophate won’t do much at all .several goes with a long fencing spade seem to work ok but no guarantee of success rate .it can be a bit like bindweed where the smallest piece of the root left can regenerate again especially if its next to a river .wouldnt quote for the job price but hourly rate and clearly state no guarantee it won’t come back.

  • Like 1
Link to comment
Share on other sites

I've got my tree surgeon colleague going in before me who will drop a few pine, remove a buggered up box hedge then cut the bamboo. My task is to level the ground by kicking out the dead bamboo with the grinder. I'm proposing to the client that using the focussed heat of the flame wand on the cut of the plant to penetrate to the root system. Normally I've used the method of the cutting the stem just above the first ring from ground level, piercing the membrane and putting neat glysophate directly into the plant. 75% effective but very time consuming. 

Link to comment
Share on other sites

4 hours ago, Mick Dempsey said:

I dug it out with a digger, it wasn’t deep, like a carpet, but what do you do with the arisings? I don’t want that stuff all over my tip site.

Try and separate as much soil as possible (maybe a rake bucket) then burn the roots

  • Like 1
Link to comment
Share on other sites

The bamboo root ball is only half the problem though (unless it is clumping bamboo, which is unlikely) then there will be runners going out from the main root ball for quite some distance.  Just removed two bamboos from mine with a digger but fairly small ones by comparison ~18" cube each but the runners are well over 6' in all directions.  My runners are within a few inches of the surface (most are <3" down) though so can be removed quite quickly once found.  If you don't take these out then it will come up all over the place.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.