MS200t Handle Assembly

[Timber Tom]

Howdy all!

Does anyone out there have a diagram to show the handle assembly on an MS200t? I took it apart to fix the earth wire which I soldered up and put it all back together but the saw still wont turn off using the switch, so would like to check ive put it back together rite or if its my dodgy repair.

 

Cheers.

 

Tom.

[Stephen Blair]

i had the same problem, i gave it to someone in a box, they gave it back in the box, then i gave it to someone else who gave me it back built but it wouldnt work, then justins mechanic sent me a diagram and i gave it to someone and it came back fixed except the choke lever wont work, so i am going to send it to justin to fix. its a nightmare mate, i think my guy has bent one of the rods. I dont have the diagram anymore, sorry not much help really lol

[Jonesie]

If you have a fax I can send you a diagram or PM me your address and I'll post you one, but you need to PM me tonight as its our last day tomorrow.

[redmoosefaction]

Get a work shop manual for around a tenner. Really handy. In fact get it for all your machines.

[Johny Walker]

If you have a fax I can send you a diagram or PM me your address and I'll post you one, but you need to PM me tonight as its our last day tomorrow.

 

shuting up shop on a thursday un heard of up north or is the work xmas bash that good no one fit to work till next yr

[Jonesie]

or is the work xmas bash that good no one fit to work till next yr

 

Its an all day affair on Friday

[Al Cormack]

Howdy all!

Does anyone out there have a diagram to show the handle assembly on an MS200t? I took it apart to fix the earth wire which I soldered up and put it all back together but the saw still wont turn off using the switch, so would like to check ive put it back together rite or if its my dodgy repair.

 

Cheers.

 

Tom.

 

Have a look here, it may help:

 

http://arbtalk.co.uk/forum/general-chat/10977-ms200t-please-help.html

 

Al.

[High Scale]

The most important step to taking apart the handle assembly is to take off the on/off switch first before you take out any other screws in the handle!

[Timber Tom]

Thanks for the email Pete thats a great help, seems ive put it back together right but no joy, i'll spend another hour tonight fiddling with and see what happens...

 

Thanks for the input guys, much appreciated!

[Gerbutt]

That ms200t help please was put up for me, helped loads with the on off switch. Also type ms200t exploded diagram into google and you find the one for the whole lot. Took me an evening to sort the one I was using but got there in the end.