Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Machine started running rough yesterday, lumpy as if only running on one cylinder. Took the plugs out for a look and ones got a lot more carbon build up than the other. What's caused this?, ta.

 

 

IMG_1693.JPG

Log in or register to remove this advert

Posted
17 minutes ago, eggsarascal said:

Machine started running rough yesterday, lumpy as if only running on one cylinder. Took the plugs out for a look and ones got a lot more carbon build up than the other. What's caused this?, ta.

 

 

IMG_1693.JPG

Left hand one has been running over hot, maybe weak mixture, right hand one is carboned  but not oily  so rich, why I cannot guess. When it is running pul one plug cap off to see which one is missing.

Posted

I was trying to figure out whether a weak spark caused the fouling or the fouling with carbon caused the weak spark.
Either way I'd start with checks and easy things. New plugs, check air filter clean, check plug lead condition, check fuel filter.

Posted (edited)

Two new plugs in, I had them, leads look ok, air filter fairly clean, not bad, fuel filter looks ok. It's running ok with the new plugs, I'm just wondering what caused it to happen.

 

Edit: missed a bit, pulled one plug lead at a time and it ran ok on 1 on each cylinder.

Edited by eggsarascal
Posted
1 hour ago, eggsarascal said:

Two new plugs in, I had them, leads look ok, air filter fairly clean, not bad, fuel filter looks ok. It's running ok with the new plugs, I'm just wondering what caused it to happen.

 

Edit: missed a bit, pulled one plug lead at a time and it ran ok on 1 on each cylinder.

Well chances are it was one of the plugs was duff, probably the black one. There is still likely to be an overheating problem.

 

 

Posted
1 hour ago, openspaceman said:

Well chances are it was one of the plugs was duff, probably the black one. There is still likely to be an overheating problem.

 

 

Ok, I'll get it looked at, I know a man that can.

Posted

Could just be duff plug and that's the end of it, they do fail sometimes. Had em go bad when hot too so engine starts fine then plays up when warm.

If it's running fine then maybe after a few hours pull the plugs and just check it's not going black again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.