Jump to content

Log in or register to remove this advert

Husky 346xp


TW1990
 Share

Recommended Posts

Hi chaps recently picked up a free 346xp as always wanted one and new it needed abit of work.. it came with no muffler and the chap said work fine before just didn’t get round to fitting a new one ?

So new muffler fitted, starts fine but whines abit when pulling the cord... 

reved up lovely but would keep reving once finger is  off the accelerator then slow down and cut out.... just like this link 

https://www.arboristsite.com/community/threads/husqvarna-346xp-ne-not-running.223501/

 

would it be an air leak causing this?

 

also seems to be a lot a bar oil leaking from behind the clutch plate... (picture shows how much oil from just from taking the bar off) could this be causing air leak some where down the line. Have attached some pictures of the piston etc etc as think could do with being replaced. 

 

Any info from people who had similar issues would be great.

 

 

 

3D49BEC0-5B7D-47BC-A585-EA482C94CD94.jpeg

200C6E35-2E5F-434B-AD23-833B20F35CB0.jpeg

2DAD845C-64CB-468E-AB0C-CBDDC299DD09.jpeg

Link to comment
Share on other sites

Log in or register to remove this advert

The photo without the muffler seems to show marks on the piston. This might be a sign of it seizing previously.

 

It may be worth removing the clutch to check around the oil pump to see where the leak may be coming from.

Link to comment
Share on other sites

Chain oil is almost certainly leaking from the two pipes that "seal" onto the pump. Most of the ones I have had have done this. Replaced the pipes and pump still leaks.

 

It has clearly seized in the past. I'd vac/pressure check it. Then Pull the pot, likely will clean up and be usable. pop a meteor piston on it could have seized from poor fuel, but suspect air leak from the behaviour you describe, which will need addressing.

 

Enjoy!

 

 

 

 

  • Like 1
Link to comment
Share on other sites

1 hour ago, billpierce said:

Replaced the pipes and pump still leaks.

Have you tweaked ally plate that covers it,

I put a slight indent in with punch right were pipe is so it pushes hard on pipe. 

  • Like 1
Link to comment
Share on other sites

Have you tweaked ally plate that covers it,
I put a slight indent in with punch right were pipe is so it pushes hard on pipe. 
I'll get round to that one of these days. Thanks for the tip. Quite an annoying trait the constant weeping of oil
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.