Jump to content

Log in or register to remove this advert

Backpack or cowhorn brushcutter for graveyard...


BobG
 Share

Recommended Posts

I've been tasked with clearing a four acre church/graveyard which is overgrown with brambles and young trees. It is on uneven ground and many of the large horizontal gravestones are surrounded by 8 inch high wrought iron railings which you can't see until you've hit them with the strimmer/brushcutter. What type and size of machine would you recommend and what type of cutter? I'm thinking that I'll have to stick with nylon line due the amount of hidden ironwork.

 

thanks in advance...

strimmer.jpg

strimmer2.jpg

strimmer3.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

https://www.ebay.co.uk/itm/OREGON-TECHNI-BLADE-YELLOW-6mm-205-pieces-professional-quality-strimmer-line/362066615217?epid=1805570915&hash=item544cda1bb1:g:saoAAOxyJX1TBylU

 

Either way I'd get an attachment that uses these^^^ for 1 machine near the gravestones and thick grass and standard brush cutter blades for brambles etc not near graves in another machine or switch over heads. 

 

Can't you kill it in areas?

Link to comment
Share on other sites

Personally cowhorn, much nicer on a harness than a backpack, If it will run it id get 3.3mm line. Wouldn’t take anything around the actual gravestone as even nylon line can mark if stones old/moss has grown on it/weathers got in ect ect.. leave 6 inch around each stone and Gingerly use a pole hedge trimmer if you must, id be tempted to get some glyphosate down myself.

Link to comment
Share on other sites

maybe something like a wheeled strimmer would be easier https://www.justlawnmowers.co.uk/wheeled-strimmers-brush-cutters.html 

other outlets available I think you can hire them if its going to be a one off  or something like this https://etesia.co.uk/etesia/brushcutters/attila-88.html  then finish the dodgy areas with a hand strimmer

Link to comment
Share on other sites

Wish we could but the fence is only two feet high in places...

How about a flock of mini sheep, a deckchair and a cold beverage?
Failing that I'd use a light strimmer with 2mm cord for the easy/grassy stuff and an angled pole hedge trimmer on a harness for the thicker stuff.
Make sure it has the metal end thing.
Small chainsaw and silky for the rest.
[emoji106]
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.