562 sprocket choice??

[shavey]

 

Yes it does exist  I think it is the  72APX but it’ll be 050 gauge 

[TheHungrySquirrel]

Thanks shavey.

Now to figure out getting a roll of it over here.

[thetoolnut]

.404 on a 60cc saw, i don't think so. Imo .404 is for 660/661 or 395/3120. The 562xp comes with large Husky mount 3/8" 7 pin. Imo full skip chain is for 70cc saws and up.

[Rough Hewn]

.404 is 120cc territory only.

[thetoolnut]

  On 05/02/2018 at 18:27, Rough Hewn said:

.404 is 120cc territory only.

Agreed, 660/661 or Husky 395 would be pushing it!

[Stubby]

  On 05/02/2018 at 18:30, thetoolnut said:

  On 05/02/2018 at 18:27, Rough Hewn said:

.404 is 120cc territory only.
 

Expand  

Agreed, 660/661 or Husky 395 would be pushing it!

Expand  

I agree , although my 395 runs a 36" .404 with no trouble .

[thetoolnut]

  On 05/02/2018 at 18:59, Stubby said:

I agree , although my 395 runs a 36" .404 with no trouble .

The 395 is a pig!

[Stubby]

  On 05/02/2018 at 20:00, thetoolnut said:

  On 05/02/2018 at 18:59, Stubby said:

I agree , although my 395 runs a 36" .404 with no trouble .

Expand  

The 395 is a pig!

Expand  

Not sure if that is a compliment or an insult ...................

[thetoolnut]

  On 05/02/2018 at 20:03, Stubby said:

Not sure if that is a compliment or an insult ...................

Complement in a way, a great performer but not a great saw to look at. The 660 is comparable in terms of performance but is easier on the eye.

[htb]

Got both, both look good in different ways. But are we getting into a chainsaw beauty contest?