Jump to content

Log in or register to remove this advert

My splicing attempts


old snake
 Share

Recommended Posts

Log in or register to remove this advert

What do you use to mark the cover on the Sirius Jake?

 

I need a proper workbench. I keep getting my ear chewed off for leaving frays of rope and bits of welding wire on the carpet.

 

Well played Joe. Can't believe you managed to keep Mark quiet! Either that or he's plotting his comeback.

 

I used a red pen and marked the green flecks for the first few marks. For the taper I pulled the strands as I counted. Was quite difficult to be honest but I made sure I just doubl3 checked my marks before doing anything. Was chuffed with the result. Used a soft fid from premium ropes to bury the core which worked amazing. Only cost £15 I reckon. Can send you the link if you wanna check it out?

Link to comment
Share on other sites

Well played Joe. Can't believe you managed to keep Mark quiet! Either that or he's plotting his comeback.

 

I used a red pen and marked the green flecks for the first few marks. For the taper I pulled the strands as I counted. Was quite difficult to be honest but I made sure I just doubl3 checked my marks before doing anything. Was chuffed with the result. Used a soft fid from premium ropes to bury the core which worked amazing. Only cost £15 I reckon. Can send you the link if you wanna check it out?

 

 

I spotted the soft fid whilst I was Facebook stalking Tommy. Definitely worth a punt over my homemade fids that perforate my hands.

 

You pulled the strands from the mark moving towards the end? Sounds like hard work!

 

Gotta get back into it soon. My first step would have to be organising myself a work space. Kneeling in front of the coffee table gets painful after a while. (There you go Mark, nice easy one for you).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.