Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Hey guys, Im trying to push for an oak panelled shower :thumbup1: but im guessing you would need a special coating to protect from hot water and soap.

 

Has anyone done it or is this even safe?

 

Thanks Graham

Log in or register to remove this advert

Posted

My own experience is that oak and water don't mix well. It tends to go black, I think due to tannins in the wood.

 

I've got oak work tops in my kitchen and they need a lot of maintenance with regular oiling to keep them looking half decent. Around the sink the wood gets black staining very quickly.

 

I carved myself a bathroom sink out of elm. Elm doesn't mind water at all. It's still looking great after about 5 years now with very little maintenance. The finish is Danish oil mixed with turpentine.

 

Go for an elm panelled shower!

Posted

I think the only way to do a shower is first cement board, silicone joints. Make sure joints are tight and make sure that's waterproof then oak or preferred material. Then a marine varnish sand between every coat as wood fibres will raise, do this at least 10 times. Then probably a coat or 2 every year if used regular.

If you can tongue and groove the wood all the better.

Posted

As above, but moisture and oak ain't friends.

Just be prepared to rip it out if it goes skew.

Maybe resin coating the slabs/planks all over first?

Very interested in your results.

[emoji106]

 

 

Sent from my iPhone using Arbtalk

Posted (edited)
I think the only way to do a shower is first cement board, silicone joints. Make sure joints are tight and make sure that's waterproof then oak or preferred material. Then a marine varnish sand between every coat as wood fibres will raise, do this at least 10 times. Then probably a coat or 2 every year if used regular.

If you can tongue and groove the wood all the better.

 

My approach would be the first half of this but treat the oak with an epoxy resin so it is completely encapsulated so protecting it from the water. West system resin is designed for this in boat building. Only difference being hot water but think it would cope fine with 35C as it must get hotter than that if out in the sun.

 

adamelder that elm sink is lovely :thumbup1:

 

Dad and me built this boat in wood with epoxy resin around 10 years ago and the water has not got in yet

Edited by Woodworks
Posted

Hi love your sink Adamelder, as for the oak shower I am with everyone else , either resin coat all over but if even a small amount of water gets in it will stain and look crap , I would go for elm , good luck and do keep us up to date and some pics

Cheers Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.