Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Anybody else running 16/17 year 550s

 

Had two for the past 6 months and there terrible, constant cutting out, poor starting and bogging in cuts.

 

Worst thing is cutting out when going for the backcut.

 

I'm not after the whole stihl/husky debate as I have some older 550 that run fine.

Log in or register to remove this advert

Posted
Anybody else running 16/17 year 550s

 

Had two for the past 6 months and there terrible, constant cutting out, poor starting and bogging in cuts.

 

Worst thing is cutting out when going for the backcut.

 

I'm not after the whole stihl/husky debate as I have some older 550 that run fine.

 

Take em back to the dealer and say make em run like the older ones you have .

Posted
They have been in and been 'reset' apparently?!?!

 

Trouble is they can only start and run them. It's in the real world they suck with cutting out issues.

 

So how did they " reset " them ? I thought you had to bury it the full length of the bar for 2 or 3 mins ? ....Take the dealer a big log ! :001_smile:

Posted
So how did they " reset " them ? I thought you had to bury it the full length of the bar for 2 or 3 mins ? ....Take the dealer a big log ! :001_smile:

 

You can reset the auto tune, there is a fuel reset or a master reset. It just means you then have to use the saw hard for 5 mins to let the system reset to the saws condition.

Posted
You can reset the auto tune, there is a fuel reset or a master reset. It just means you then have to use the saw hard for 5 mins to let the system reset to the saws condition.

 

is there 1,off thses for tha ms201tcm, got 2, 1,fines others a bitch :biggrin:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.