Husqvarna U.K. = a dam joke!!!

[Daniël Bos]

Great. Cheers. I'll need to wait till I have some substantial sized logs I can cuts discs with for 5 minutes to get it spot on lol

 

 

Sent from my iPhone using Arbtalk

 

This is what many people think.

 

It's not really true though.

The saw needs to see a continued load of 75% or thereabouts, it does not know how that load is put on. You could cut a series of full bar length cuts along some thinner logs (noodling), rather than across them, or if you can stand up a log and make some long rip-cuts that would do as well.

As long as when you're cutting you're putting the saw under sufficient load, the autotune will be happy.

[AllyH]

This is what many people think.

 

 

 

It's not really true though.

 

The saw needs to see a continued load of 75% or thereabouts, it does not know how that load is put on. You could cut a series of full bar length cuts along some thinner logs (noodling), rather than across them, or if you can stand up a log and make some long rip-cuts that would do as well.

 

As long as when you're cutting you're putting the saw under sufficient load, the autotune will be happy.

 

 

Ah I didn't know that either to be honest. Well

In that case I'll need to find some logs I can butcher lol

 

 

Sent from my iPhone using Arbtalk

[Stubby]

Once you have set the A/T the first time it will continually be adjusting itself to compensate for ambient conditions type of fuel what make of boots you ware etc etc .

[bigtreedon]

I honestly cannot understand how men who use chainsaws all day be it husqvarna or stihl find it hard to start a auto tune husqvarna it's not rocket science I have never had any issues with mine or any other people saws I have used never the less I have been on numerous jobs and a lad has picked up a 560 and pulled and pulled cursing it's these fff husqvarna the new ones are **** can't start i am completely gob smacked at the level of inability at such a simple task

 

Sent from my SM-G930F using Arbtalk mobile app

[lakeyboy]

Can't say I've had any issues with mine so far, just followed all the procedures in the book when I first got it and use the starting methods stated. Coughs on second pull and starts on third or fourth every time. I do find it splutters a bit initially? Also been run on aspen 2 since day one

[bumble B]

I honestly cannot understand how men who use chainsaws all day be it husqvarna or stihl find it hard to start a auto tune husqvarna it's not rocket science I have never had any issues with mine or any other people saws I have used never the less I have been on numerous jobs and a lad has picked up a 560 and pulled and pulled cursing it's these fff husqvarna the new ones are **** can't start i am completely gob smacked at the level of inability at such a simple task

 

Sent from my SM-G930F using Arbtalk mobile app

 

Asking a bod' to warm the saw up before attaching to the line. Then watch them needlessly use the decomp' switch also flooding the thing in the process.

[bigtreedon]

Asking a bod' to warm the saw up before attaching to the line. Then watch them needlessly use the decomp' switch also flooding the thing in the process.

Decomp never ever ever needed to use it 😣

 

Sent from my SM-G930F using Arbtalk mobile app

[Sveriges]

All this talk of resetting auto tune, I'm sorry but that's not how the system works. The system is constantly tuning every second just start it and use it. Taking the spark arrestor out does not mean you then have to go and cut disks!!

[Burgess]

I honestly cannot understand how men who use chainsaws all day be it husqvarna or stihl find it hard to start a auto tune husqvarna it's not rocket science I have never had any issues with mine or any other people saws I have used never the less I have been on numerous jobs and a lad has picked up a 560 and pulled and pulled cursing it's these fff husqvarna the new ones are **** can't start i am completely gob smacked at the level of inability at such a simple task

 

Sent from my SM-G930F using Arbtalk mobile app

 

 

In fairness if they're used to stihl or echo's hot start procedure of make sure its not switched off and pull the starter cord it is a bit of a faff.

Edited February 16, 2017 by Burgess

[Mark Bolam]

I honestly cannot understand how men who use chainsaws all day be it husqvarna or stihl find it hard to start a auto tune husqvarna it's not rocket science I have never had any issues with mine or any other people saws I have used never the less I have been on numerous jobs and a lad has picked up a 560 and pulled and pulled cursing it's these fff husqvarna the new ones are **** can't start i am completely gob smacked at the level of inability at such a simple task

 

Sent from my SM-G930F using Arbtalk mobile app

 

 

That's the page I'm on Don.

 

Also when I've asked a few people who've had bother about setting the saw up initially as per the manual it's pretty obvious they've used it to wipe their arses with rather than reading it.

 

 

Sent from my iPhone using Arbtalk