Muddy42

No the USB port is to charge the second battery whilst you use the first. That way you can keep swapping them over and cutting forever.

I agree that a full pressure and vac check would be worth it if you are still struggling. Block of the exhaust and behind the carb and send pressure/vacuum through a modified spark plug. Dunk the saw in water to reveal the most stubborn leaks. You don't even need to take the clutch and flywheel off which can be tricky.

Interesting. Simplistically I always thought anything involving turning electricity to heat used insane amounts of power compared to light/motion/motor. I would have thought manufacturers would want to skimp on this feature in the competitive race for battery life and cutting power?

I recon all wood is easier to split when freshly cut. That said the more mechanized you get (in terms of lifting and splitting) this ceases to matter. Certainly splitting helps to open up the bark and outer layers of wood which helps drying. HOWEVER, storage space and numbers of times handling logs is a consideration. If your logs won't dry from a sappy stage by the winter you might not have enough storage to house >2 years worth of logs undercover, therefore its easier to season timber in lengths then split and store next winters worth of burning in May. This is what I do.

It works! and restarts after 5 mins of cutting! Thanks for the help everyone.

that’s a great idea that I’ll remember for next time! Im learning the whole time.

Yes, you may be right, there was a really bad gouged section near the exhaust port that I focussed on. I didn't rub up and down, only round the bore, but I could have caused a similar effect. I was using a fine scotch-brite pad attached to some 30mm dowel in a drill. Let's see.

or tie on a small piece of neon coloured rope

An Iphone does this. Get the google translate app. You can hold it up to written text (like a menu) and it translates the text on screen or speak into it and it will talk back in the different language. Ive not used this last feature myself (would feel a bit stupid) but you see people booking hire cars like this the whole time.

Have you checked the transmission fluid? It could be old and needing replaced or just topped up.

I didnt know that. Language evolves I suppose, most people think a ‘ride on’ is just a mower with a seat !

Sounds in a lot worse condition than mine! I guess I am fine spending £50 a year on an old mower (and lots of my 'free' repair hours) on it. If anything happened to the engine or transmission, it would also probably be scrap as these parts are no longer available.

Yes 44mm. I don't have a compression tester. So I'll just see if it starts.

I have a 1994 14hp Bolens ride on mower (I think technically it’s a ride on tractor) with a heavy duty mulching deck. I don’t use it the whole time, but its good as a backup and for large areas of long grass that only need cutting twice a year. The machine is an absolute beast – I’ve given it a few hits on stumps and lumpy ground but it seems to shrug these off pretty easily. The deck is seriously heavy and robust. So far I have only replaced all the minor things - drive belt, timing belt, solenoid, battery etc.. I service it and replace the oil and oil filter every year. The engine and transmission seem fine. However the deck is beginning to rust in places and needs welding and the spindle bearings need overhauling and replacing. I weld and can do the work myself for about £50 in materials. I suppose even if the deck gets really bad I could probably find a second hand one and adapt the brackets to fit with the welder. I am keen to keep it going but need some encouragement. What are the major items that generally cause a ride-on to get scrapped?

I wasn't thinking properly! I'm just waiting for a new muffler to arrive and then we'll see if it fires up. Compression doesn't feel amazing (by hand on the starter cord) with the new piston, but I'm hoping that's just excess oil or lack of a break in period.

Sorry ignore me! The saw holds pressure and vacuum when sealed behind the carb with a piece of rubber.

i agree, 120 cc is even better! But what matters for the OP is simply that the required horse power is way beyond electric.

@openspaceman @Stubby I have rebuilt the top end but am now having issues with air leaks! Specifically the diagonal carburettor screw that holds the throttle and butterfly in. I have taken the whole screw out and cleaned it, but with no improvement. See video below. Is there a way to fix this? IMG_4736.mov

No. For a 20 inch plank, you need approx a 28 inch bar (to accommodate the mill and allow for corners and absolute minimum 70cc chainsaw, ideally more. There is no electric corded equivalent.

Nice work. I have a bloke, forwarder and a processor coming in a few weeks to help do mine. A few days of hard work and then the eco angus will have enough food for the winter. I stack in grain sacks in a big open sided shed. I've found that you as long as the wood is well seasoned you can bring it in wet in May and it'll be dry (about 15%) by the winter. We used to mess around manually with a tractor, trailer, chainsaw and a stone shed, but it took too long and the logs never dried properly.

I agree the 24 inch bar may be a stretch. If you do use it, keep the chain sharp, go slow and skip chain might help - all to avoid straining the saw.

Thank you. I hadn't noticed the silicone sleeve until now. I thought it was just part of the cylinder. Mine actually seems sound, but I will investigate sealing it or replacing it with a pipe that has a slightly narrower bore.

Old 1980s Husqvarna 50 Rancher (with the white top) Whilst I am waiting for the replacement piston to arrive, I have stripped the saw back, cleaned and then reassembled to pressure/vacuum test. I ended up having to submerge the saw in a bucket of water to diagnose the exact location of an air leak. The crank seals are good but air is escaping where this plastic impulse line pokes into the cylinder (see photo highlighted in red). To be clear this is the original MAHLE OEM cylinder and plastic intake partition. The plastic is a bit discoloured but seems sound, I think air is simply escaping round the side where it meets the cylinder. Is there some kind of liquid rubber sealant that I should use here to fix this? There was some rubber goo on here and the rubber intake boot when I took them apart. Thanks

This question doesn't really make sense. If by the "owner" you mean someone owns 100% of the business, they have the choice to either keep cash in the business, take it as dividends or pay out as salary. Its also currently very efficient to grow and sell a business via entrepreneurs relief. It all depends on the best tax treatment.

Thanks. That repair is Interesting, maybe one could braze in a new piece of metal? Yes I didn’t share a photo of the piston. Its horrible! Heavy scoring, skirt wear, a chip and too much movement in the cylinder. Thanks again all. I have some work to do which may take a few weeks. I will post an update.