Jump to content

Log in or register to remove this advert

Pbtaylor2014

Member
 View Profile  See their activity

  • Posts

    289

  • Joined

  • Last visited

 Content Type 

Everything posted by Pbtaylor2014

  1. Pbtaylor2014
    Hi have they said wat to us and how Tobin stall new ones thanks for all your help have tried to call mac at greenmech but they left on Friday and not back till tomorrow hopefully looking to fit new one today
  2. Pbtaylor2014
    Thanks guys for all your help and if anyone has any more it will be appreciated
  3. Pbtaylor2014
    Hi thanks what about fitting new on and any idea about the Pune inside the flywheel thanks
  4. Pbtaylor2014
    Hi guy sorry if it has been discussed befor but couldn't find anything on search I have a greenmech 15-23-26d 3cylinder izuzu engine 2004 bearings had some play flywheel was moving when I tried to move it back and forth and when on low Rev you could here the blades hitting the side ever so slightly so took fly wheel out and separated the belt wheel and tried everything to make it come off so I eventually put a hub puller on and low and behold I snapped the 4bolt friction Bering and it hasn't move so when my to the inside bearing where the blades go and too the sur clip off and that remains to stay put so is there anything or anyone to help me take off I need help asap as only have a couple off day to sort it out
  5. Pbtaylor2014
    That's right no need to go mad but if not practale spikes are out of the bag lol:laugh1:😎
  6. Pbtaylor2014
    Hi guys as you said is common practice but is not used or practale in some situations if you don't agree that's fine but pole saw reaching where ladder won't reach might be a bit of a no go he is new to this game and I should have told him not to spike but it's more likely never to affect conifers and I did mention one tree only and did mention throw line ther is a lot of arborist that will use spike if all else fails
  7. Pbtaylor2014
  8. Pbtaylor2014
    Thanks m8 for understanding you will go further in life with that attitude Yea if got 3 ms170 that's on pile for striping for speare parts screws clutch springs are the same as ms200t and other stihl chainsaws
  9. Pbtaylor2014
    How do you no its the caravan lot I'm a travler and I get the house lot come to me trying to sell me tool and yes i do not buy them but as usually we caravan lot get the blame I no there is good and bad in every race and species from now on keep it to as scumbags stealing are hard ernt tools m.I have done all my nptc city and guilds and been climbing for 2yr and have seen a lot of tools go missing including my own in Wigan doing a big job and a lad came as I was in back and helps him self to ms880 but I don't blame any population specific just the one lad old guy alert us about 5 minutes after he seen him and said I thought he work for you until I noticed he wasn't there with you and your other lads so please keep it as scumbags who steel other lively hood and bread and butter maker
  10. Pbtaylor2014
    Hi I have. Passed first time it's not hard just patients and I would book a all in one course lessons and use there car it's garanteed to be upto spec for test
  11. Pbtaylor2014
    Have used 540 but find that my ms200t is more raw grunt I no it's a older saw but love it was thinking of the ms201 but not after the lack of power but haven't used the 560 so can't comment although review of it are great
  12. Pbtaylor2014
    Hi guys I have been climbing with the stein x2 spikes and they are comfy and nice and light so I recommend because as others have said they have Velcro and cushion top on shin hope this helps
  13. Pbtaylor2014
    Some guys have said that there pins in spider jack has came loose but don't no for my self
  14. Pbtaylor2014
    I climbe only on a prusik two years and was thinking of going to a machanical but so many choices and a lot off horro stories so will have to wait and see maby a zigzag or spider jack
  15. Pbtaylor2014
    Try wet and dry paper and see if you can take the transfer puff and check all of above and try and see uf it's ok
  16. Pbtaylor2014
    Than m8 cheers hope fully I can get through tomorow
  17. Pbtaylor2014
    Thank m8 will phone up tomorrow cheers
  18. Pbtaylor2014
    Hi guys got a question about a ec15-23-26-d 3 cilynder Isuzu engine diesel Chipper and was wound wrong can I fit a second roller and also how much roughly would it cost And would anyone had experienced with bearings cost ect sorry that it was a big ask but would be great full thanks
  19. Pbtaylor2014
    Hi guys got a job in Birkenhead and need a tip site for wood chipp any help would be helpful cheers my number is 07710622900 or pm me cheers
  20. Pbtaylor2014
    Cheers guys
  21. Pbtaylor2014
    Than you for your great full advice
  22. Pbtaylor2014
    Hi guy as title say need help I have a Yale 13mm climbing rope and alway do check by feeding through finger ect to check inner core but when I decent with prusik loop the out side seem to move from the in side it slow the prusik down so I have to pull out side down because it pills up underneath the prusik pleas need help
  23. Pbtaylor2014
    Thank for the feed back guys
  24. Pbtaylor2014
    Thanks guys for the good deed back I will see next week if there in I won't be knocking just chopping lol see what the future holds
  25. Pbtaylor2014
    Hi guy been ask to fell large pop with a possibility of a grey squiral best is this allowed or not the tree has not tpo and has cavity through centre all help will be great full

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept