donk

I bought a pair of caulk boots :-D

I've just finished clearing 200ton of wind blown grandis, we were meant to thin it but went in last Sunday and found the middle of the job blown out lol

Don't think I ought to comment after I killed my old 2.5 petrol 90 in water as deep as what he's been through lol

23 year old male requiring part or full time employment within the forestry sector. I have cs units 30, 31 and 32 and am experienced in the use of tractor mounted winches, skidding and have a small amount of forwarder experience in a kockum a 84 31. I live in Welshpool, Powys,Mid Wales but am willing to travel and have a caravan if required. Please contact me on 07525456884 if interested.

560s a good saw we had a lot of trouble to begin with but were advised by a company at the longleat show to change the plug for a hotter cmr5h and hers been behaving ever since

I was under the impression Oregon power match and husky bars were the same the old gut uses a 13" power match and 9 tooth sprocket on his 560 b e a utiful to use in softwood and coppice

391 has a plastic crank case

362 is a very good saw if you want a medium saw I wouldn't bother with a 441 its a great saw but weighs too much to throw around. I used to run a 391 but found they're pretty weak less than 12 months continual forestry use resulted in a melted crank case

Ah hers fine felling with a 30" bar maybe not so good for milling but I only kill em

We regularly run a 441 with a 30" bar and it handles it fine, that's the difference between foresters and tree surgeons, we get on with the job and you lot have to make a big deal of it lol

Because a tractor is a tractive vehicle I.e. it is designed to pull a trailer plus it is a different category to a car

Those eBay wader studs look strangely like tex screws

Yup the 560 is a brilliant saw to use, handles well, pulls like a train and feels like a toy it's so light but it seems to be suffering a few fairly major teething problems, think I will stick to my stihl 362

No chain brake didn't fail he put it down without putting it on, before you say anything about that the point is the saw revs itself up, on its own, when no one is touching it, not very safe me thinks

Fathers 560 has a nasty habit of revving itself up today it did it when on the floor, this caused it to shoot forward and run across his new boots , it also demolished a clutch drum at the beginning of the week ripped the splines clean off the drum, when we took it in mechanic replaced the drum but neglected to do the spark plug up so not good, saw is in now and being sent to husqvarna its a shame really as its an otherwise brilliant saw