Jump to content

Log in or register to remove this advert

difflock

Veteran Member
 View Profile  See their activity

  • Posts

    6,711

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by difflock

  1. difflock
    Hmmm, Cud be quite the big wee list o bits needed! But she bees in quare quid hands. From speaking with David, the son, today.
  2. difflock
    Well the idiot chargehand sagely agreed with the cunning-as-a-fox digger driver, when in answer to the question of disposing of the dug out subsoil from a play area construction job said, "Simple, we will dig a hole and bury it" Doh!
  3. difflock
    Chinese crane scales are cheap, or at least affordable, and sufficently accurate for such purposes.
  4. difflock
    The grille and bumper are the worst afflicted, shame on me that I could not motivate myself to even spray the grille and bumper with Fertan. New grill now ordered. I suggested hot dip galvanizing the bumpers, but to no avail. Sigh.
  5. difflock
    To follow.
  6. difflock
    Would it not be as simple to simply arrange to drive the PTO stub at 540rpm, if that is the required PTO speed? In the correct direction of rotation of course.
  7. difflock
    After 2 or 3 years of Covid related blow-offs and postponments, I finally got her booked in with a reputable local bloke, D.A. Stewart over at Moneydig, but it will NOT be cheap. Pics to follow. Marcus
  8. difflock
    I bought a 2nd hand 5' by 10' 3500Kg Dale Kane, with clip on mesh high cribs, tis indeed a heavy fornicator, best suited to the SDP Van than the Rav4, so I might need to buy a lightweight trailer for behind the Rav4. but in conscience the Dale Kane has already served me well moving various loads of rubbish from the daughters place, where the high cribs were well needed. I was however admiring a 2700Kg Nugent recently, that looked better suited to the Rav4, being no heavier than it needed to be, though sommat, like a Benderup, plated at 2000Kg would be a better fit.
  9. difflock
    I did have the gritted teeth experience of watching our "trained" chainsaw operator catch the asphalt with the point of the bar, while attempting to trim the butt of a tree for Christmas. While the idiot chargehand waved and gesticulated, "cut it there", with his unprotected fingers. Which blunting then necessitated a round trip to the local Stihl dealer, because none of them could sharpen the chain, nor even have the wit to keep a spare, etc etc etc. And no Council vehicle could apparently go anywhere unless at least carrying a co-pilot. Also watched another idiot attempting a deepish cut, but round in a circle with a masonary saw. And he could NOT comprehend why the saw was fighting him!
  10. difflock
    Yup! That is where I got it, identical.
  11. difflock
    Not actually sure, but I seem to recall recovering a very powerful round one, like one that would draw blood as it nipped a careless finger between it and a girder. cheers
  12. difflock
    Surely stroking the tool with any strong magnet is al that is needed? Like one liberated from a bust microwave.
  13. difflock
    More the weather for a hot whiskey over here today, from 16 deg on Friday to 32 deg on Monday and back to 16 deg inside of 48 hours. Mad!
  14. difflock
    Well I admit the beer I drank wernt a real mans beer, being Peroni(which I blame on the daughters choice of fridged stocks) Mind you I got a heavy walled glass in the freezer drawer for another bottle of Peroni later today.
  15. difflock
    Sall right, whilst my written statement was actually factually honest, honest Guv, mostly it boiled down to simply being outside all day yesterday on my feet and active in the heat. I did break sweat when burning the bamboo and sparks and big smuts drifted over onto my massive and bone dry firewood stockpile, in the wind that wasnt. But the petrol pressure washer with the orbital nozzle makes the perfect misting/rainmaking device, to drift in the same non existant wind. Phew. Senior Management was most disapproving. Especially when I then told her I was going out on the bicycle.
  16. difflock
    This ould done 63 year old, wot sat behind a desk his working life, was up at 05:00, spent all day loading and levelling and raking topsoil, then a spot of picture hanging for the daughter, then fighting with bamboo and shovelling stones, then went for a cycle at 20:00 after a bamboo bonfire back at base. Worked in shorts and a teeshirt with a baseball hat failing to protect my neck in 30 deg heat and strong Sun with zero suncreen. And never felt fitter, though I did gargle plenty of fluids, incl a couple of beer. Zero sunburn or heatstroke either. P.S. It is to be 16 deg tomorrow and pissing with rain!
  17. difflock
    An update, it seems that after switching their fuel supplier, fuel consumption went back to normal. Suggesting that the previous "cheapest" fuel supplier was somehow adulterating the diesel(simply cutting it with kero perhaps?). Not that I imagine that cutting or diluting diesel with anything that will still burn or run in a diesel engine, could double fuel consumption. And as likely all the attention and discussion simply caused the fuel thief to cease and desist. marcus
  18. difflock

    Moorhen?

    difflock replied to difflock's topic in Picture Forum

    BINGO!
  19. difflock
    Sounds like, as in my wife was making noises about thinking about lodging a claim of "harrassment", which is very NOT like something she would suggest. Mothers, eh!
  20. difflock
    Thanks all, Lydia has blagged my jar of Symbol, though is holding it back as a last resort. I advised her not to offer to or to set foot next door, let them sort their side out, and anyway the neighbour told her not to be coming round? cos they got CCTV cameras. Fingers crossed it will all blow over. P.S. The boundary wall is 50 years old, block built and plastered and still 100% vertical, straight and sound, which suggests proper deep founds, so I was surprised the bamboo had found a way through, but guessing most probably via an unfilled or improperly filled joint in the blockwork. Thanks all, Marcus
  21. difflock
    So our daughter bought a house about 5 years ago, which was rented out for about 3 years, now that she is living in it she has started to tidy up the neglected and overgrown garden. In this process the neighbours over the boundary wall "braced" her about the invasive bamboo which had migrated under the wall and into their flagged back garden. Lydia started to remove the bamboo immediately, which she had been minded to do anyway. The neighbouring husband was on the warpath this afternoon again while Lydia was actually working at removing bamboo roots on her side of the wall. Lydia had been quite unaware that the bamboo had migrated under the boundary wall until the neighbours first spoke to her a month or so back. What is the legal situation re liability? Should she speak to her insurer? Marcus
  22. difflock
    Ah bin burning conifer, Sitka and Lodgepole for 20 odd years now, straight, pure and unadulterated, but BONE dry. Zero issues, nor has the flue ever required cleaning. Super easy to light, and with an almost instant hot fire. mth
  23. difflock
    asahi+beer - Recherche Google WWW.GOOGLE.COM Was probably to blame! Ask me how I know. P.S. Lovely work Andy. Despite the beer.
  24. difflock
    I thought of SS, Aluminium, or galvanised, but figured that whilst it might have been copper, or more likely cheap brass origionally, the galvanised would be the most period appropriate. But since I have the copper and it is easily worked, and I can solder the corners leakproof and it will look attractive and age gracefully. So now I need to contrive a contraption of a home made brake-press. Or try and get the cousin to do it at his work? Cheers all.
  25. difflock
    You want a solid block, of such a height that the head of the splitting Ax or maul strikes the top surface of the block being split at near enough 90 degrees. Force vectors or some such.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept