Jump to content

Log in or register to remove this advert

Tommy_B

Veteran Member
  • Posts

    8,993
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by Tommy_B

  1. When you have repeated this a couple of times, pull hard on the thread and cut it and it will disapear inside the rope. (I couldn't do this as I was taking pictures!!)
  2. Once you've pulled everything through, put the needle back in the same exit hole and repeat. Pull the thread through and just massage the cover to make it disappear. (pic 3 and 4)
  3. Once you find the needle coming out of the 'bottom' of the wrapping and its ready to go back through the 'top' (I hope that this is making sense!!) Push the needle downwards through the centre of the whipping so it comes out underneath all of what you have just done. (picture 3)
  4. Once you have stitched all the way through the rope pass the needle all the way 'over' the stitching that you have just done and insert it into the 'bottom' of the wraps. I think these are called frapping turns, (although I might be wrong!!) Try to make sure that these don't twist as you put them through, (unless you want them to, but that is a bit frisky for me!!)
  5. Once you have wrapped up the rope, push the needle through when you have covered the 4 stitches, as a rule of thumb they reckon you should wrap the diameter of the rope.
  6. This first picture is the needle exiting the rope on the 4 stitch. Once you have done this, wrap the thread around the rope going upwards towards the splice.
  7. Once the thread has gone completely through, repeat this step so the thread goes through the rope 4 times. Make sure you pull the thread tight so it sits at flat as possible. It will make the whipping neater when you're done!!
  8. Because I am a heavy handed muppet, I find that if you are pulling the thread through it can shoot out the other side, so leaving a couple of mm on the first go (first pic in this one) and then pulling it tight once the second cross stitch goes in can help stop the swearing!!
  9. Push needle through as close to the eye as you can and pull thread all the way through so it just disappears into the rope. Do this on the bury side.
  10. Here you go mate. Think it'll be easier if I do them a couple at a time!! Equipment for whipping. Scissors or knife, Flat pliers, needle and twine and Sail makers palm. Cut about 5 hand spans worth of twine and thread the needle, doubling it up
  11. This was how I interpreted it as well. Sorry to derail the thread. To get back to the original post, hitchclimber is a great bit of kit. Take the time to read the Hitchclimbers Guide to the Canopy. Lots of tips!!!
  12. Did you splice them yourself?
  13. Just out of interest, how many spliced eyes did he cut off?
  14. Your LOLER man needs changing before you change cord!! Op is miles better than Boa, stick with it!!
  15. Pictures please!!
  16. Done!!
  17. Just gone to shed cause its half time and I'm nice like that!! They are large but should be fine for 34 35 waist. I had the zip repaired at dry cleaners. They've not seen a lot of action. I bought them off a mate as a bit of a favour. I'll try to stick a photo up.
  18. I've got some Stretch airs in the shed. I'll have a look at sizes tomorrow for you if you like. In good nick.
  19. Search Frictionhitchery in YouTube. Mog posted it
  20. If they went out for a night in Glasgow they could get the combat training as well!!
  21. Maybe it could be less controversial if they armed the pigs. Then at least it would be a fair fight.
  22. I got them. Really nice. Will report back when I can
  23. Why would you not want wives to see this?? Nothing girly about eating!! Nothing wrong with Sushi. Lovely stuff.
  24. Was it you?? ha ha ha!!
  25. The pussy and all the VIP events I get invited to!

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.