Jump to content

Log in or register to remove this advert

Advice on chain oil


Sawted
 Share

Recommended Posts

Log in or register to remove this advert

  • 7 months later...
i use vegetable oil from aldi or lidl.

 

I considered using veg oil but was concerned that it may form deposits in the oil tank, pump or oilways when the saw is left unused for several months at a time. Do you have any issues like that?

 

Also, I read that the biodegradeable oils such as the the one Bosch sells for their AKE range of electric saws, and which seems not to come cheaper than £9 a litre, have stabilisers and anti fling additives.

Link to comment
Share on other sites

Some Bio oils dry to form a glue like gunge that is a right bugger to get off engine parts. I hate this stuff and it is almost impossible to get it off a saw once it has hardened. If you use one, make sure it is one that doesn't go solid as I have seen chains welded in to bar rails with the stuff....not good!

Link to comment
Share on other sites

I considered using veg oil but was concerned that it may form deposits in the oil tank, pump or oilways when the saw is left unused for several months at a time. Do you have any issues like that?

 

Also, I read that the biodegradeable oils such as the the one Bosch sells for their AKE range of electric saws, and which seems not to come cheaper than £9 a litre, have stabilisers and anti fling additives.

 

The bio oils that you mix with water will royally screw up the workings if left too long - total disaster. I been using straight lidl rapeseed oil - not sunflower - Rapeseed (they sell it as "vegetable oil" this will not cause any problems if left for month in the saw. Cheaper by far then the regular bio oil, which is just rapeseed with tackifyer. It will attract mice and rats though, so hang your saw high and don't leave empty bottles lying around. If you decant it into a rule/oil can, hang that as well or the'll chew through the plastic. The canadian forestry sector has done a pile of research on pure rapeseed oil in saws and they agree that its the best lubricant - superior to mineral oil - the only caveat being that on very long bars you do want to involve a takifyer. I have used it on a 28" bar without problems.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.