Pics of your milled products

[Rob D]

Hi all,

 

I am new to arbtalk and thought I would start by posting some pics of my first milling project.

 

Hope it works....

 

Kyle

 

 

Nice work there Kyle - that design works well with planks

[muttley9050]

Hi all,

 

I am new to arbtalk and thought I would start by posting some pics of my first milling project. [emoji106]1:

 

Hope it works....

 

Kyle

Cool bench. Good job.

[KWarb17]

Thanks for the encouragement guys, always good:thumbup:

[Dillinger86]

Had a go with my new 36' mill on some walnut today. 390xp pulled quite well but a 3120 may be the way forward. Will paint the ends with Pva and get them stored.

[Tony Croft aka hamadryad]

On 7/29/2017 at 09:28, Dillinger86 said:

Had a go with my new 36' mill on some walnut today. 390xp pulled quite well but a 3120 may be the way forward. Will paint the ends with Pva and get them stored.

Olive ash, nope its walnut! teach me to pay more attention! one of my faves.

 

Edited September 3, 2017 by Tony Croft aka hamadryad

[Tree Tastic Care]

What's the reason behind the pva at the ends ?

Sent from my SM-A310F using Arbtalk mobile app

[CDMR]

On 9/3/2017 at 12:29, Tree Tastic Care said:

What's the reason behind the pva at the ends ?

Sent from my SM-A310F using Arbtalk mobile app
 

It seals the end grain and stops the wood from drying unevenly, causing splits and deformation.

[kav]

Just finished this oak breakfast bar for friends. Boards have moved a bit in there new home even though i milled them ages ago. I did make some wooden legs but we thought the simple hairpins worked well.

[Stephen Blair]

[Jamespepperpot]

Made this coffee table for a client over Christmas. Got a pippy/burry oak top, brown oak legs and normal oak rails. Tried Some fancy strengthened lap joints and dovetailed blind half laps as I wanted to use some joints I’ve not tried before.
Milled all this wood with an Alaskan years ago when I first started chainsaw milling. Pretty chuffed with how it turned out!