Jump to content

Log in or register to remove this advert

generator question!


Big T
 Share

Recommended Posts

Anything up to 4 times normal running current I'm afraid.

If you run too small a genni then your splitter will pull the voltage down and draw more current than it should. Might end up damaging both machines. As Steve suggests 3 or 4 kVA minimum.

 

I have not damaged a genset by overloading it, in practice the over current protection has tripped or the engine stalled but probably not worth the risk as you both say.

Link to comment
Share on other sites

Log in or register to remove this advert

I have not damaged a genset by overloading it, in practice the over current protection has tripped or the engine stalled but probably not worth the risk as you both say.

 

Older generators were a bit more over made and able to absorb a bit more heat and abuse. Now every thing is designed by cad and copper is expensive if it says 2 kva it will be.

 

A short circuit trip is useless to prevent overloading your generators a 16 amp trip will stay in until 30 amps if you build it up gradually. Over loading a generator will degrade the insulation in the windings and cause the alternator to fail in a short space of time.

 

I sound like I am giving a lecture :lol:

Link to comment
Share on other sites

  • 2 weeks later...

i know so much about electrics i could write on back of a stamp with soooooo much space to fill left. so wont try there, however i do run a fairly good splitter off a honda gx engine

 

came in around £600, i get at least 7 hrs full throttle running to a tank full of petrol, about a gallon.

 

i use all over place, either tow behind landy or stick splitter on trailer for trip and all i need is gallon of petrol for day.

 

may be worth looking into engine option,

 

cant recommend anyone other than buxtons highly enough, 2 branches as far as i know, one scotland and one england, i dealt with england one. storeman was great!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.