Where to get larger circlip pliers?

[Woodworks]

Broken our tractor and failing to remove some bearings as our circlip pliers are far too small. I can see various ones on Ebay but would nice to pick up some today. Are there any outlets for this sort of thing. Looked at Halfords but the only ones they have listed are the same small ones as we have.

 

Any pointers appreciated

[mendiplogs]

Broken our tractor and failing to remove some bearings as our circlip pliers are far too small. I can see various ones on Ebay but would nice to pick up some today. Are there any outlets for this sort of thing. Looked at Halfords but the only ones they have listed are the same small ones as we have.

 

Any pointers appreciated

 

Hi wood mole valley then can borrow a pair thanks Jon

[Woodworks]

Good idea Jon

 

Not got a Mole valley close by but will ring round a couple of other similar stores we do have

[TimberCutterDartmoor]

Machine Mart?

[Woodworks]

Tried machine Mart but they were pretty vague on the phone.

 

Mole Avon at Oakhampton have got some Draper Expert rachet ones so may pay them a visit.

 

Thanks you two

[woody paul]

Local garage, Farm, Agri fitter or Plant hire firm maybe for a drink.

[Woodworks]

Thanks Mendiplogs

[eggsarascal]

Thanks Mendiplogs

 

Could you not have worked two screwdrivers into it?

[Matthew Storrs]

in a similar emergency I once ground down a pair of old pliers to a fine point and these worked so well I never bothered buying a new set of circlips!

[Woodworks]

The picture does not really tell the story. The tricky one is inside the housing in the top of the picture. If you look very closely you may be able to spot it loose on the shaft. Can't get it out until the whole thing is apart.