Jump to content

Log in or register to remove this advert

Luck or judgement?


old snake
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

One trick I have used a few times is if you have an anchor point in line with the hinge some distance away is put in a lowering rope as high as you can down to the anchor point and put a bit of tension on. Then when you fell the rope follows the same pivot as the hinge but the tip of the stem cannot move towrd the fence.

006.jpg.b17e2c8dd84f5148eadfba4db1c4d5d6.jpg

Link to comment
Share on other sites

Luckly judged!!

Hopefully we are all moving from less luck -----to more judgment .

Great to see the vid and the analysis. A bit like a good debrief.

With a fence so close a stay rope( 90 degrees fall direction) to plus a pull rope would have been ideal.

A deeper face cut(gob) with the direction slightly more away from parallel to the fence line.

We would have had wedges in the back cut nearest to fence side.But i drum it into my guys to always have axe and wedges with them when falling.

Awesome that their are so many experts in one room:001_tongue:

Link to comment
Share on other sites

Cheers guys i hear wot your sayin about a bigger gob but there was a great big hole in one side of the tree and i wanted to try and leave as much sound wood as possible to use for the hinge. I like the idea of usin the butress roots to hold it though steve.

 

Here's a pic of the stump

 

Was that a back release cut? and are those your wedges in the top left hand corner?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.