Jump to content

Log in or register to remove this advert

greenmech ecotech 150 chipper smoking


mattyboy
 Share

Recommended Posts

I am using this chipper for a job for a couple of weeks. It is smoking white smoke out the exhaust when at full revs and when not chipping for about 30 secs. It also feels a little slow pulling stuff through compared to timberwolfs and jensens of similar size engine that I have used before. It has done very little use only 30 hours so thought it a little strange. Any ideas as to what is wrong with it? I have very little knowledge on chippers.

Link to comment
Share on other sites

Log in or register to remove this advert

Is it wood smoke or oil smoke? (ie does it smell like a bonfire or an old engine)? If it is woodsmoke check there isn't a chog of wood jammed somewhere rubbing on the flywheel/belts/tensioner pulley/resting on the exhaust etc. Also make sure the exhaust isn't blowing and directing hot exhaust onto a build up of chip somewhere.

If it is definitely coming from the engine then go and see a mechanic would be my advice - an engine is an engine.

Link to comment
Share on other sites

I am using this chipper for a job for a couple of weeks. It is smoking white smoke out the exhaust when at full revs and when not chipping for about 30 secs. It also feels a little slow pulling stuff through compared to timberwolfs and jensens of similar size engine that I have used before. It has done very little use only 30 hours so thought it a little strange. Any ideas as to what is wrong with it? I have very little knowledge on chippers.

 

If it's a diesel white smoke means too much fuel ie not getting burnt.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.