Jump to content

Log in or register to remove this advert

Lighting for a building with no power


Ashes_Firewood
 Share

Recommended Posts

You need some of these!!

ImageUploadedByArbtalk1421279580.686150.jpg.ed3f1a06e4f4f8fdbe372c8820058c70.jpg

 

5 LED - 975 Lumens

8 LED - 1600 Lumens

 

10-30volts

3 watts per LED

 

Magnetic mounted - allows you to easily move them around as needed !

 

12v leisure battery - made to withstand constant discharge & recharge

 

Trickle charge solar panel charge for each battery

 

This are pretty good for there size eg 10ft high good light for about 15 square

ImageUploadedByArbtalk1421279559.448786.jpg.9342d5f2edae0ca9d1868105b1ce98a1.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

HI MATE there £65 there at toolstation but my mate got some the same for £36 inc vat :thumbup1:thanks local thanks jon :thumbup:

 

 

 

 

The toolstation price is the best going on the Nightsearcher

You can get cheaper rechargeable LED floodlights (£25 ebay) but you get what you pay for :001_tt2:

Link to comment
Share on other sites

Wire it up conventionally with 220V lamps, keep the power requirements as low as you can and use several switches so that you can decide exactly how much light you need in the building at any one time - i.e light it in sections rather than as a whole.

 

Run the demand side back to an isolation / changeover switch and arrange two supplies:-

 

1. A bank of deep cycle caravan batteries wired in parallel with any form of wind/solar chargers arranged to trickle charge. Size the battery bank according to the power required for your 3 hour full load demand and allow a bit of slack. These will need to be wired through a 12V-220V inverter

 

Batteries from tanya.co.uk or similar

 

2. A plug in source for an external 220V generator, this will allow you to run the lighting at any time you need and remove the possibility of battery run down leaviing you in the dark so to speak.

 

Make sure there is a good earth on the system.

 

Cheers

mac

Link to comment
Share on other sites

For 12v LED's in 2 containers we use:

 

2 x leisure batteries (£200)

1 x 80w panel, 10A controller & frame (£200)

30m of cable & rat proof conduit to reach sunny spot (£200)

Bunch of enclosures, LED's, switches, etc (£200)

Time for set up (£200)

 

Total cost to run a handful of LED's =£2,473,998.02

 

The batteries and controller lasted about 2 or 3 years, on 2nd set now.

 

If we run generator, a battery charger is on too.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.