Massey F 35X hydraulic flow rate

[doobin]

454 It's better spec as it's a more recent tractor. Still half the price of a 35x.

[arboriculturist]

Split it and put a 200 series multi power pump in, outlet pipes to left hand side, may have to machine out the torsion tube on the pto to suit, 35 will be a fine spline, 68 on 135's have coarse spline like a 200.

Gives you 9 gallon a minute, been there, done that.

 

The pump on the 35X is on its last legs.

 

Any ideas where best to buy the 200 series pump you recommend - perhaps you could post a link?

 

Much appreciated.

[mendiplogs]

The pump on the 35X is on its last legs.

 

Any ideas where best to buy the 200 series pump you recommend - perhaps you could post a link?

 

Much appreciated.

 

Hi Arb try Howard's and sons Ron greet too thanks Jon

[arboriculturist]

Hi Arb try Howard's and sons Ron greet too thanks Jon

 

Thanks Jon.

 

I want buy new with a warranty.

[mendiplogs]

Thanks Jon.

 

I want buy new with a warranty.

 

Hi Arb how much is this going to cost then better off going see some old Massey Ferguson dealer that has old stock there's a good MF DEALER IN cumbria they have tons Of parts I've for got there name I will look it up thanks Jon

[mendiplogs]

Thanks Jon.

 

I want buy new with a warranty.

 

Hi mate it Dobson who you need to ring they will have it new off the self thanks Jon

[Alycidon]

Is the flow on a 135 similar?, was thinking of using one to power a bigger processor. It has enough power just about but machine also needs a decent hydraulic flow. Never had an issue with it tipping 4 ton grain trailers.

 

Thanks

 

A

[mendiplogs]

Is the flow on a 135 similar?, was thinking of using one to power a bigger processor. It has enough power just about but machine also needs a decent hydraulic flow. Never had an issue with it tipping 4 ton grain trailers.

 

Thanks

 

A

 

Hi ALY better off with a Massey Ferguson industrial I was talking about it tonight with my old Massey Ferguson mate and the the pump on an industrial is very large flow great powers are processor easily thanks Jon

[Alycidon]

Hi ALY better off with a Massey Ferguson industrial I was talking about it tonight with my old Massey Ferguson mate and the the pump on an industrial is very large flow great powers are processor easily thanks Jon

 

Or a bigger tractor, not to many industrial MFs about these days. The 135 would not be big enough to move a big processor around. Nice JD 3050/3350/3650 would do or I can hire in a JD 6600 from the farm.

 

A

[cornish wood burner]

Or a bigger tractor, not to many industrial MFs about these days. The 135 would not be big enough to move a big processor around. Nice JD 3050/3350/3650 would do or I can hire in a JD 6600 from the farm.

 

A

 

Old internationals have good flow and pressure 574 or one of that series if you could still find one.