Jump to content
-->

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Posted (edited)
Didn't the makita dcs5000 models also suffer from engine malfunction of similar sorts ?

 

The PS-5000/DSC5000 was made at the same time as the 5100S (for all markets except the US), but it was rev limited at 13,500 rpm and had a different crank. There were other more minor differences as well (plastic handlebar?).

 

I haven't heard of a similar amount of issues with those models, but that may just be because I mainly have been on US saw forums?

Edited by SawTroll
Posted
Not that early, as far as I know - and if so it didn't work too well.

 

However, the 5105 was supposed to have improved engine cooling over the 5100S - but the trouble continued, at least as long as they were the 14,500 rpm version.

 

i think the european models had the red coil and usa models had the grey coil then in march 2010 they updated the models to a black coil :thumbup::thumbup:

  • 3 months later...
Posted

so i have got a bit muddled, but can someone clarify- if i'm looking to buy a makita/dolamr 5000 or similar which are the models/years to avoid?

 

also i use red stihl oil on all saws is this going to be a bother?

Posted

You can buy a Dol 5105 as a request from Mak dealer or from Shavey on here. Prefer the genuine red dol myself to the died the wrong colour Mak.

 

Very good pricing on the 5105 :thumbup1:

 

yeah, move on from old red hp; it is mineral based, stinks horribly and isn't JASO rated for the latest saws. HP plus is semi and HP ultra full synth but pricey. Dol or Echo Power Blend is the best priced Jaso F-D oil

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.