A jist bought me a sawmill off Donedeal!

[difflock]

The 3630 Baker.

My larning beginnith:lol:

Well it will, after I buy a 3Ph Genny and get a lean-too shed built out the back.

Marcus

[Graham w]

very nice!

[broonie]

let the challenge begin ..

[bobh]

Pictures!!

 

Sent from my Nexus 7 using Arbtalk mobile app

[Woodworks]

Nice one Marcus

 

Look forward to some pictures of some wood butchery sorry I mean quality milling

[Stihlben]

Very tidy looking saw...

[broonie]

Baker band sawmill.For Sale in Westmeath - DoneDeal.co.uk

[difflock]

Hi Sur, dat bes hit!

Currently (pun intended) looking for a 3 Ph Genny, of about 100kva.

A very confusing subject (to me at least), but time enough until after I get the Mill del and installed.

Since I would prob really need to read the Motor spec plate , apparently.

m

[broonie]

gensetseteve might have insight into genny requirements Marcus

[gensetsteve]

Hi Sur, dat bes hit!

Currently (pun intended) looking for a 3 Ph Genny, of about 100kva.

A very confusing subject (to me at least), but time enough until after I get the Mill del and installed.

Since I would prob really need to read the Motor spec plate , apparently.

m

 

If you let me have the size of the motors I will give you a rough idea. The biggest motor will probably be the one in the pic. If its say 10kw you can get away with a 40 kva just depends on what else is likely to start and run at the same time. On paper the start up current is 6 times running but in practice you can get away with 3 times. It can get complicated and sometimes its worth doing a rough calculation and hiring a generator in for a week while you set it up. I would think you could get away with a 60 kva but need some details first.