Jump to content

Log in or register to remove this advert

Tw150 oil?


Gerbutt
 Share

Recommended Posts

Hiya

 

I have a tw150 35hp kubota, what engine oil does it take? I've had a looksy in the manual and I can't see it?

 

Also, I'd like a new battery for it. It takes a 063 which the one on it says 460amp I think. The varter 063 says 360amp, why the difference? A bigger amp varter wouldn't fit where the battery sits?

Link to comment
Share on other sites

Log in or register to remove this advert

  • 1 month later...

DIESEL ENGINE - OIL VISCOSITY RECOMMENDATIONS

 

OUTSIDE TEMPERATURE

Below 32° F (0° C) Above 32° F (0° C)

 

SAE/Viscosity

 

10W/30 or 15W/40

 

PETROL ENGINE - OIL VISCOSITY RECOMMENDATIONS

 

OUTSIDE TEMPERATURE

Below 32° F (0° C) Above 32° F (0° C)

 

SAE/Viscosity

 

5W-20 or 5W-30

10W-30 or 15W-40

 

 

Air Cooled Engines

SAE30

Link to comment
Share on other sites

If your chipper is not always idle after startup for a couple of minutes before running full chat, consider adding something like Lucas oil stabilizer for a bit of protection.

 

All oils etc can be had from your local motor factors. I'd recommend getting an account with them, it saves so much time. Just make a phone call and it turns up a couple of hours later.

Link to comment
Share on other sites

Not recommending it but:-

In the war when they struggled to start Merlin engines (spitfires) in winter because the oil was too thick ( viscous) they added petol to the oil to thin it.....

 

They reckoned petrol evaporated as oil warmed up

 

Mind you the spitfires weren't designed to last that long either!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.