Is it time to replace my 200t

[Stubby]

When I need to reset the A/T will it log on through my WiFi or do I need to drive to London? If you get my meaning.

But seriously, does it need to be plugged into a pc? and can I get the software to do it myself? Does anyone understand the technology behind the A/T?

 

No . Just to set it start it up and cut . It says the full length of the bar for a few mins . This is the first time you use it ever . After that just rev it hard for a few seconds in fresh air when you fire it up in the morning for the first time . The thing is its constantly adjusting to the conditions all the time . Mine did run dry once and it was all over the place so I took it in . The guy plugged it in to the pc in the work shop and reset the carb. It took seconds . He did say that if I persevered with it it would have reset its self though .

[jnoon]

Hi mate for what's it's worth ,I have an 18 month old 201t been spot on , it has had an exhaust mod ( totally **** ) without it,

All I've had to fix on 201t was new chain brake assembly in 18months as the old one went stiff,

I've also just got a 540xp

Time will tell as it's only a week old and my experience with auto tune saws isn't good however the 540xp is certainly nicer balanced than 201t and feels lighter,

I would say not much speed difference on smaller stuff but the husky might just have the edge on a bar full

 

Josh

[Backpain]

So the t540 arrived last week from FRJones next day! I love them! As for the saw it was a little strange to begin with. Took a while to start and set its self up. Now it's made its mind up its a full blown thoroughbred topper it knows what it's doing. I absolutely love this saw, it's a real screamer. 14 inch cut and it pulls through like a dream. It's so well balanced too, I never felt safe with my 200 in one hand but the t540 feels lighter and easier to handle. What's more it smells like a real 2 stroke should.

[Backpain]

The only issue now is which Husky do I buy to replace my old 044?

[swinny]

372 xp !

[mixedangased]

The only issue now is which Husky do I buy to replace my old 044?

 

254xp if you can find a nice one

[Perkins]

I've struggled with a 201 for 12 months, the dealership has seen it four times, replaced the carb and replaced the pot and piston, and has now sent it back to stihl for testing. grrr.

needless to say I won't be buying another one.