Jump to content

Log in or register to remove this advert

Recommended Posts

Posted
thats funny. I've had problems starting my 395XP and my 357XP when using the Stihl red mix. I only use bio/low smoke 2 stroke now. Also, I used to use other people fuel when freelancing and ended up seizing up a 357XP due to a bad mix. Stihl saws are a bit less fussy on the mix, but Husky's can indeed be a problem. My MS201T runs on anything...except Aspen...yet my MS200T loves the stuff!

Hi, change the carb diaphrams and pump piston in your Stihl MS201 and it will run on Aspen

Log in or register to remove this advert

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Posted

We use stihl semi sinthetic the green one and mix @ 40:1, got a fs450 clearing saw theys had its brains revved out for the last 5 years and stil a strong machine with good compreshion! Same mix goes in huskys and stihl with no trouble

Had mate with brand new ms660 ran on stihl RED standard oil and siezed up so I dont use it.

 

any modern sinthetic or semi 2sroke oils will all perform the same

 

Grao

Posted
Using Q8 two stroke oil in a 550xp with no problems as of yet. Think I'll switch to the stihl semi or husky xp next time to be on safe side.

 

I use " DM Chainsaws " own brand (my local dealer ) in every thing . Never had a problem .

  • 2 months later...
Posted

Issue came up this weekend. Hire place know I'm a husky man so when I picked up a stihl blower for the day I got lectured on how it must be run on stihl oil. 'Och it'll be fine' didn't cut it and they refused to hire until I bought some stihl oil.

 

Won't be so honest next time when asked what oil I use!

 

Dave

Posted
Issue came up this weekend. Hire place know I'm a husky man so when I picked up a stihl blower for the day I got lectured on how it must be run on stihl oil. 'Och it'll be fine' didn't cut it and they refused to hire until I bought some stihl oil.

 

Won't be so honest next time when asked what oil I use!

 

Dave

If you use the oil they recommend and the blower siezes up whilst you have it, you can hand it back and say "it was your oil mate"

 

If you use your own.......??

Posted
If you use the oil they recommend and the blower siezes up whilst you have it, you can hand it back and say "it was your oil mate"

 

If you use your own.......??

 

And they'd believe me? Any hire shop would chase if an engine seized what ever oil used. I'm just surprised that a knowledgeable place would insist on a brand. Maybe it stops inexperienced folk mixing in whatever 5w40 they have in their shed.

 

I'll end up mixing 5l with stihl oil then using leftovers in husky saws.

 

Dave

 

Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.