stihl 362

[mendiplogs]

Mines just standard, you get pretty warm keeping up with the saw, and it loves oak! 9/10 I'm workin over GBL, with 8 tooth sprocket, doesn't phase it! Forget stihls! They've dropped the ball IMO with all these new saws, too restricted by emissions, especially with the 4 mix, and the saws need opening up to make em go!

 

 

Sent using Arbtalk Mobile App

 

HI EDDY your right mate there the best 60cc out there now but I DO LIKE MY 880 ON A 4FT BAR :thumbup1:JON

[Eddy_t]

HI EDDY your right mate there the best 60cc out there now but I DO LIKE MY 880 ON A 4FT BAR :thumbup1:JON

 

It's not a new stihl, and the 880 is a bit heavy to fell a load of 12-30" trees

 

 

Sent using Arbtalk Mobile App

[Ian C]

dont forget lads, the 362 is on 3/8 chain & the 560 is on 325 chain, it may make the 560 a tad quick , any body got it on a 3/8 chain

 

I run a 560 on 3/8 chain, far better than 325.

[mendiplogs]

It's not a new stihl, and the 880 is a bit heavy to fell a load of 12-30" trees

 

 

Sent using Arbtalk Mobile App

 

HI EDDY but it nice on large beach tree on the ground mate it fly into the wood :thumbup1:jon

[mendiplogs]

I run a 560 on 3/8 chain, far better than 325.

 

HI TREES why is it better then thanks jon

[TimberCutterDartmoor]

hate .325 chains

 

I run a 560 on 3/8 chain, far better than 325.

 

Second that

[Pete Mctree]

WOW you got a 560 - bully for you .

 

Why don't you run around, telling everyone like a 5 year old with a new trainset, whilst holding mummys hand. Oh hang on a minute, you are

 

This is getting so tedious, (especially coming from members who have not even run the saw). Why not discuss someones choice as opposed to blitzing a thread - someone might need help, or information hence posting!!

[Stubby]

WOW you got a 560 - bully for you .

 

Why don't you run around, telling everyone like a 5 year old with a new trainset, whilst holding mummys hand. Oh hang on a minute, you are

 

This is getting so tedious, (especially coming from members who have not even run the saw). Why not discuss someones choice as opposed to blitzing a thread - someone might need help, or information hence posting!!

 

Mmmm . You could have a point there .

[KGBFINGAR]

My mate runs a 361 on a 20" no problem so I woud recon it will be good .

K

[TreeswingerPerth]

I run a 2007 361 on a 20" bar for cross cutting and it's great . So I would recon a 362 would be as good if not better !

TS