Jump to content

Log in or register to remove this advert

The Art of Zig Zag


silky fox
 Share

Recommended Posts

Right lads I have had a play here is some pictures of the damage on my rope and the conclusion I have come to.first off the damage.ImageUploadedByArbtalk1364329188.922480.jpg.e660ecf93ae9c684e14d6b74cda1c137.jpg

Secondly I found a burr on the 1st groved link at the top of the rack, kind hard to see in the picture.ImageUploadedByArbtalk1364329291.356649.jpg.7270e5d24dd95bd8f3fb2aec739fb7ad.jpg

Once found I load tested to see what Links took most load and it seems the top ones squeeze the rope together which could cause the rope being snagged on the fine burr.ImageUploadedByArbtalk1364329367.206960.jpg.c5430f5d3a2cd0588a27e0b6b19ec425.jpg

My bottom links have smoothed out nicely as the rope runs at a angle over them so I'm going to get some fine paper and remove the sharp edges and burr on the top groved links and hopefully this will do the trick.

 

 

Sent using Arbtalk Mobile App

ImageUploadedByArbtalk1364329169.053796.jpg.2d9fa343d1f66a9436c65dc1870e3ef5.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 430
  • Created
  • Last Reply

Top Posters In This Topic

Your bottom links look way wrong bud. Might have to pull the rope through so its like the top links

 

 

Sent using fones4hobbits

 

There fine mate I pulled the rope out the bottom links to test how much load the tops take.

 

 

Sent using Arbtalk Mobile App

Link to comment
Share on other sites

Ah k lol but shouldn't all the links take the same amount of force?

 

 

Sent using fones4hobbits

 

Yea but the bottoms put a bend in and add friction and the tops seem to clamp the rope as the rope stays more vertical, I believe these are the ones causing damage.

 

 

Sent using Arbtalk Mobile App

Link to comment
Share on other sites

That burr looks bad.

 

Smoothing it down would be vital IMO.

 

High scale it's not the line where the brown dirt is that's a light defect its the top corner of the cut out, just incase you was seeing it wrong.:-)

 

 

Sent using Arbtalk Mobile App

Link to comment
Share on other sites

just checked mine too, no burrs no real signs of wear. i also think it could be top top links as they have the sharpest edge.

 

i would post a photo but just basically shows a new zigzag. i will be contacting petzl this wk.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.