Identifying Tirfor

[SB1]

Can anyone help identify this tirfor? I cannot find any markings on it, other than Tirfor and Super cast on one of the levers. It has approx 11/11.5mm cable.

 

Im after some shear pins if anyone could recommend a supplier too. It looks like the shear pins have long gone, should the handle just come off the end of the shaft? As its quite firmly stuck on there. Thanks

 

 

[s.varty]

Wecome, any decent chainsaw etc shop will sell tirfor shear pins. and its a small tirfor , cant help more.

[woody paul]

My old boss had tirfor like that 1.5 ton I think good handy size.

[swinny]

I same one. Sure it said 30ctw on it some where... will look back now.

[WorcsWuss]

Same as mine I think.....

 

http://arbtalk.co.uk/forum/rigging-roping/37157-tirfor-id-please.html

[treequip]

I used to have a Tirfor T 16 that looked exactly like that

[openspaceman]

Can anyone help identify this tirfor?

 

 

I've still got one TU15 IIRC 30cwt pull

 

 

 

Im after some shear pins if anyone could recommend a supplier too. It looks like the shear pins have long gone, should the handle just come off the end of the shaft? As its quite firmly stuck on there. Thanks

 

Spare brass pins normally kept in that tubular carry handle with plastic bungs in either end to retain them. Chances are someone has driven som steel pins in instead

[openspaceman]

I used to have a Tirfor T 16 that looked exactly like that

 

I think that was the later model with the diagonal handle at the back

[SB1]

Thanks for all the replies, I was leaning towards it being the 1.5t one, should there be any markings on it anywhere lurking under the rust or would there originally have been a plate with them on attached to it?

[woody paul]

Should be a Brass plate on side in picture 2 has the handle socket been welded to shaft?