Jump to content

Log in or register to remove this advert

help with spurs in ash?


normandylumberjack
 Share

Recommended Posts

I have just got a pair of distel gecko spurs and to be fair no expert with spurring, but have had a bad day with the gaffs slipping out, and also tearing the bark off the tree. The result was face in tree trunk, and some very bruised ribs.

 

Can anyone advise me, as its really knocked my confidence. The stem was about 15", Ash, lanyard not flip line as i dont have a flip line.

 

Thanks in advance.

Link to comment
Share on other sites

Log in or register to remove this advert

Had a similar moment a few weeks ago on an ash, was tired at the end of a long day and didn't kick in hard enough- when I stepped up the gaff just peeled a strip of bark and I shot down about 12 feet before I managed to stop myself (cracking bruises on the right forearm, bicep and chest). Like you say, gives the old confidence a bit of a knock!

 

To try and feel a bit more comfortable I passed my lanyard from the right leg D (climb in a treemotion) round the left side of the stem then round to the left D in a figure 8 pattern. Figured if I lost my gaffs again I wouldn't go far as the lanyard chokes onto the stem. Haven't fallen on to this, just hung gently, but it could be a bit hard on the knackers!

 

No doubt there's some reason why this is a terrible idea but it worked for me until the elvis leg went away. Its like the falling off the horse thing- just have to get back on.

Link to comment
Share on other sites

bloke that told me how to spike he said the first thing u must do is not to hug the tree

he said u should leave just enough room between u and the stem to s**g ur miss :lol:

not only that he told me if i did get up the tree he would kick my back side from the ground to the top of the tree :lol:

and wire core can make things easier

found this hope it helps u out

Edited by burrell_
Link to comment
Share on other sites

For me I imagine the spur is the chisel point and hip-knee to ankle as the handle and when all things are lined up the chisel/spur point drives into the tree.

Its all about angles and seems to me hip lanyard and tree and body needs to be at plus or minus 45 degrees.

once the angles get further away or to close to close, the chisel looses effect.

Cheers

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.