Jump to content

Log in or register to remove this advert

What's on your bench today?


spudulike

Recommended Posts

I use a James Sonic 6D. Being a 6 litre one, it is large enough for the larger ride-on carbs, but not too large for saw carbs.

 

Beware of buying one too large, as the cost of cleaning agent will be higher and heating large volume for a small carb is wasteful not only on power, but also on time.

 

I am using a from a can of detergent I bought many years ago, but its all labelled in some foreign lingo, so i cannot say what it is.

 

My next can will come from the people who supplied the bath, as they seem to know the best to use.

[ATTACH]145410[/ATTACH]

thanks barrie :thumbup::thumbup:

Link to comment
Share on other sites

Log in or register to remove this advert

 

You will pay import duty on purchases from Australia, best get it from the EU.

 

These budget cleaners all come from the same factory - Bejing Ultrasonics, my first one expired and am currently trying to fix it but purchased another as I use it all the time.

 

The digital ones are OK although I was told that the mechanical ones are simpler and more reliable.

Link to comment
Share on other sites

You will pay import duty on purchases from Australia, best get it from the EU.

 

These budget cleaners all come from the same factory - Bejing Ultrasonics, my first one expired and am currently trying to fix it but purchased another as I use it all the time.

 

The digital ones are OK although I was told that the mechanical ones are simpler and more reliable.

 

Ok Thanks for looking

and for the heads up on the MV8500 ELITE HAND VACUUM pressure pump:thumbup:

Link to comment
Share on other sites

how long have you had it :thumbup:

 

About 18 mths, works well, I have a small one for very small items, but it is nice to be able to get bigger bits in it.

 

Make sure you put water in it before plugging it in, almost cooked mine.

 

H-A

Link to comment
Share on other sites

Was cutting for about 15mins with old husky 50 rancher, was in amongst dirty upturned roots so stopped saw to sharpen, wee bugger wouldn't start again after 20 pulls! Had to go back to van and get the jonny 630.

Husky not done that before, any thoughts?

Obviously it's an old saw, but any pointers would be welcome. Thanks mull.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.