Favorite Chipper

[PeteB]

Jensen have just made a 750 kg unit just for the uk market. It has a 30 hp kubota turbo engine, braked chassis metal light board, folding hopper. It is shorter than the standard A530DI. So it is a very compact unit and has all the heavy duty features of the Standard A530DI.If anything it picks up quicker than the standard unit because of the turbo.

 

Is it going to be at Saltex or the APF? i look forward to seeing that one.

[tractor10_0]

Is it going to be at Saltex or the APF? i look forward to seeing that one.

 

Not sure about that. Do you guys do one?

[tractor10_0]

i have that jensen.....nothing wrong with it at all

 

What model do you have Steve?

[ACUF]

Anyone know these? I'm fitting it on my U900.

 

Comments, suggestions on weather I should use the 540 or 1000 rpm pto setting?

 

-I actually had to use the high flow pump for the two hydraulic feed wheels.

[Mike Hill]

I have a CH160 on my U1000.Its mounted on rear hydraulic linkage and I run it at about 1300rpm.

 

Check the gap between the blades and anvil(s) before you used it.Mine was wide open and blocked alot before I changed the blades for the first time and discovered the problem.

[A_lopa]

Bandit 250 is my favorite all rounder

[Steve Bullman]

What model do you have Steve?

 

the 518 2000 model. didnt really need a chipper to be honest as most of my work is contract climbing, but couldnt turn it away at the price it was.

[PeteB]

Not sure about that. Do you guys do one?

 

In our current range we do a sub 750kg machine with a 6x9 inch opening and a 34hp turbo diesel. The turbo thingy keeps the flywheel thingy spinning good. As per usual, it will be at Saltex, APF, Weald Woodfair and available for private viewings!!!

[Steve Bullman]

and available for private viewings!!!

 

wow, you even cater for strange fetish's at greenmech huh?

[Arborlord]

My infeed on my timber wolf is 6 by 11 inch measured it out of curiousity. Do you think you could put nitrous in a chipper lol