Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

I would personally use a mewp. We used one to clear an ancient monument and grade 1 listed wall in Shaftesbury. It was good fun to watch it level out on the cobbles. Not so much fun when at the end ofthe day he decided to take me to its max reach of 80ft. I dont mind heights but when it starts to sway in the wind thats when i cross the line.

Log in or register to remove this advert

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Posted

That is Virginia creeper, not ivy.

 

It should with luck pull off from the base, cut it low then ease the stem away using a crow bar, get around 6' lose then use jerking tugs and with luck it will come off in sections.

 

 

It will leave the small sucker marks on the surface of the wall and the client needs to be aware of this.

 

I could do the job in around a day so 1.5 to allow leeway and definitely ladders for the stubborn bits.

Posted

Unless the picture is deceiving and that house is actually a castle a MEWP would be a massive over doo, and the price would be extortionate.

Ladder!

or if your a wimp them little scaffold towers from HSS

Posted
That is Virginia creeper, not ivy.

 

It should with luck pull off from the base, cut it low then ease the stem away using a crow bar, get around 6' lose then use jerking tugs and with luck it will come off in sections.

 

 

It will leave the small sucker marks on the surface of the wall and the client needs to be aware of this.

 

I could do the job in around a day so 1.5 to allow leeway and definitely ladders for the stubborn bits.

 

 

It is a mixture of both virginia creeper and ivy.

 

I would put 2 days on it, as there is a hedge there too they want doing so i will put in two prices, one for the hedge and one for the ivy, the scaffold guys on our yard should have a tower i can use.

Posted

Get a mewp or get some scaffold around it. That gable end will feel alot higher than it is when you're tugging at the creeper with no anchor point and harness on......Why risk your neck working off ladders just to save a few quid ?

Posted

Get something in writing to say you are not responsible if the render comes off with it. We did a job just like this and the chap said just pull it all off. I told him it had gone under his render. Dont care he said I want it off. We cut the bottom of it tied it to the towbar and it nearly all came off in one piece along with most of the chaps render. He was ok about it though lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.