Jump to content

Log in or register to remove this advert

Rate My Hinge.


Frank
 Share

Recommended Posts

Log in or register to remove this advert

Do you have an explanation as to why??

 

Or are you just going off what you were taught??

 

For felling in the woods particulary for saw logs, you want to minimise the amount of wastage, and the risk of the hinge ripping up into the trunk. Therefore smaller mouth and thinner hinge (generally if it goes wrong in the woods, you get the winch out). However in situations i.e. houses, caravans the bigger hinge is safer.

Link to comment
Share on other sites

ok here is a pin oak, dismantled to 30ish ft and felled the stick in a tight back yard. Bored the middle out. Came over nice.... :001_rolleyes:

 

9and a half out of 10. Only for the fact your saw dug in slightly on back cut at about 12oclock. Haha. Very nice

Link to comment
Share on other sites

For felling in the woods particulary for saw logs, you want to minimise the amount of wastage, and the risk of the hinge ripping up into the trunk. Therefore smaller mouth and thinner hinge (generally if it goes wrong in the woods, you get the winch out). However in situations i.e. houses, caravans the bigger hinge is safer.

 

True, but this is Arb, which is about removing a tree not producing timber. You would look well using a tiny gob to save the log, then ringing it up.

 

A large gob just makes tipping the tree easier, I've asked this before, but no one has come up with a good explanation for why big gobs are bad.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.