Jump to content

Log in or register to remove this advert

Rate My Hinge.


Frank
 Share

Recommended Posts

Log in or register to remove this advert

It was a 10 inch back leaner at the original felling cut but it had too much weight so sat on the bar and i didn't have the strength to lift it the other way. So did a dog tooth about 18 inches about the original cut to fell it the other way. The tree was only about 7 inches wide there so did a small gob, bored in and left a very small bit of holding wood on the back. I couldn't do a simple fell as it would have barbers chaired on me.

 

Still don't get the "ballsy" bit?? what did your instructor think was going to happen???

Link to comment
Share on other sites

Still don't get the "ballsy" bit?? what did your instructor think was going to happen???

 

Under cut is a little flawed, back cut lower than hinge? Cant tell...

 

He thought it was going to do a simple cut but decided to do a dog tooth with no room for error. The bore cut is slightly lower than the sink cut but only by a tooth width. I was in training then and was the day before the assessment.

 

It could be the camera angle or the fact i didn't cut the hinge off flat.

Link to comment
Share on other sites

Forward leaning sycamore on a woodland edge. Start the back cut, bang hit a nail, move up an inch, bang hit the SAME nail. Chain now bit knackered. Managed to bore through to sort of create a dogs tooth cut in the wrong order. Was expecting a small breeze to catch it and make it barber chair before I got the bore cut in.

 

ImageUploadedByTapatalk1393196940.289635.jpg.a2dd59009160d4650be321e0a9868a63.jpg

 

 

Another one in the same group. Slight hole in that one.

 

ImageUploadedByTapatalk1393197118.905375.jpg.c2ebcdc662fddeeb00664e3876022764.jpg

Link to comment
Share on other sites

  • 3 weeks later...
[ATTACH]149792[/ATTACH]

[ATTACH]149793[/ATTACH]

A leylandii fell from last week

[ATTACH]149795[/ATTACH]

A spruce

 

 

I know this post was a few weeks ago, but can I ask, were you taught to fell like that or is it just something you've seen others do?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.