Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted
17 hours ago, GarethM said:

Do you buy Stihl spark plugs cos they're betterer?.

 

I will admit the two stoke oil is better tho, swings and roundabouts and all that.

 

Help, help I'm being repressed!.

Is it better for saws as well as swings and roundabouts ? I buy whatever chain oil is on offer but not veggie as my saws stand about and that stuff attracts mice as well as congealing in the tank.

Posted

Ive posted here about this but Ive had a lot of bar oiling problems recently on older Stihl chainsaws with Stihl bars.  These are professional saws with adjustable oilers that I have set to max.  I've done all the usual problem solving, cleaning out the tank, lines and pump etc. but ultimately I had to open up the oiler holes on the bar as they weren't aligning properly.  Bar oiling problems are a right pain and a good way to wreak bars.  I found that thinning the oil with diesel was helpful.

  • Like 1
  • Thanks 1
Posted

Reading the last page about how most oils are from the same base with scientifically experimented and calculated additives in to make it do the right stuff and then "Yeah, but, I just bung diesel in it to make it work right"

Posted
14 minutes ago, Steven P said:

Reading the last page about how most oils are from the same base with scientifically experimented and calculated additives in to make it do the right stuff and then "Yeah, but, I just bung diesel in it to make it work right"

Or just buy summer/thinner chain oil, probably cheaper and better all round.

  • Like 1
Posted

Yea but once I'd bought 25l and used some, it was too late and I'd rather rescue it with diesel.  I don't think this affects the additives. 

 

My take on bar oil is that the base oil is one massive compromise - too thick and it will bung up the pipes and too light and it will fling off the bar.  The additives give it a little extra boost so that it has increased ability to stick to the bar nose for a given viscosity. Also as described above an adjustable oiler helps to correct for any system problems or allow you to get away with thinner oil.

 

 

Posted

Re Neck Oil, well Bill, it's another one that may polarise opinion. That brewery was founded by Robert Plant's son ( yes, that Robert Plant ) and was initially welcomed as a microbrewery. As is often the case, the brewery is now controlled by Heineken, so the true afficionados of craft beer now view it with disdain. 

 

Re thick or thin bar oil, I use Stihl Synth Plus, which I am led to believe is Rheopeptic, ie thickens when subjected to shear forces. Don't know how well it's rated by others, but it works for me. 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.