MS650 2011 Never cut wood

[Khriss]

4 minutes ago, Rough Hewn said:

Because modern saws are better than old ones. (Mostly)
🤣

Nooooooooooo. Though its mostly usin it proper. Plus i dont live in a rainforest.  K

[Rough Hewn]

I’d like to learn to port saws and have a Collection of working classics like bucking billy ray [emoji23] some of those old husky’s and mcCullochs he runs are great [emoji106]

Sunday saws....
[emoji6][emoji106][emoji106][emoji106]

[Rough Hewn]

Nooooooooooo. Though its mostly usin it proper. Plus i dont live in a rainforest.  K

For a 660 to cut faster than a 661,
You have to do a looooooot of work to it.
Can be done but it’s a big job.

My Stock 661,

Vs@wonky 660

[emoji106][emoji106][emoji106]

[Khriss]

Noticeably faster, however if you let that go out on our  job, it would come back blunt and blocked air filter, probably with burnt clutch 😮 K

[lux]

For a 660 to cut faster than a 661,
You have to do a looooooot of work to it.
Can be done but it’s a big job.

My Stock 661,

[/url]


Vs@wonky 660



[emoji106][emoji106][emoji106]

Did spud do the 660

[lux]

Sunday saws....
[emoji6][emoji106][emoji106][emoji106]

I have been mulling the idea that when the house build is more complete here ( not too far off ) I may see if there is interest in a bit of a camping / saw fest / beer up festival at my place. [emoji106] Sunday saws especially welcome [emoji23]

[Macpherson]

4 hours ago, Paddy1000111 said:

Sorry, I didn't mean the saw was a gimmick, I meant the fact that it used the same base as a 660 and was "upgradable". No doubt it's a good saw!

Absolutely no need for an apology, it was just the wee devil no my shoulder at arf one in the morning after many drams...I reckoned I new exactly what you meant but I just couldn't help myself 🤣

If I ever do upgrade I'm fairly sure it'll be to an 881.

[spudulike]

4 hours ago, lux said:

Did spud do the 660

Nope, would be interesting to run one of mine against it. Circa 3 seconds difference in cut speed so circa 15% between the two!

[lux]

Nope, would be interesting to run one of mine against it. Circa 3 seconds difference in cut speed so circa 15% between the two!

I’ll send you one of my 660’s to do and compare if you are available in January [emoji106]

[spudulike]

Currently booked up until sometime near the end of Jan so just adding each customer to the growing list and telling them when to send kit in at the moment!