Jump to content

Log in or register to remove this advert

Absolute beginner help...


Rob_the_Sparky
 Share

Recommended Posts

Log in or register to remove this advert

On 01/10/2020 at 21:15, JAG63 said:

If it's only occasional use and fuel is likely to sit for a long time consider using Aspen 2 or a Stihl/Husky equivalent like Motomix. A bit more expensive but keeps far better.

Funnily enough that is exactly what I did, even found a local supplier.  It is a bit expensive but the stability of the fuel means that for my occasional use it is ideal.

 

Got it running at the weekend after a bit of swearing and a sore arm from so many attempted starts.  Think I was messing up the starting procedure and flooding the engine.  Will have another go if we get a window in the rain at the weekend as I think I now know what I was doing wrong (not activating the feature that holds the throttle part open for starting).

 

It is interesting using a small petrol saw after the mains powered one I'm used to.  My initial impression in that the mains saw is better, which was not what I was expecting at all.  Still need to give it time to get used to the new saw and will be good to be able to work without being tied to a cable now and again.

  • Like 1
Link to comment
Share on other sites

I had a query once from someone at work who had used a petrol chainsaw to try and cut logs but was very disturbed by the saw throwing the wood out of what she called timber jaws. I asked her what she was doing and was told that she was trying to operate it in the same way that she had operated an electrically powered chainsaw some years before. I then discovered that electric chainsaws don't always have a variable throttle and she had been using the electric saw with the throttle fully depressed. What she didn't know was that the petrol saw had a variable throttle and was thus taking it to a small log at full throttle which was throwing the wood up in the air. So if you dont already know, regulate the throttle use on your petrol saw. 

  • Like 1
Link to comment
Share on other sites

1 hour ago, DocMustard said:

I had a query once from someone at work who had used a petrol chainsaw to try and cut logs but was very disturbed by the saw throwing the wood out of what she called timber jaws. I asked her what she was doing and was told that she was trying to operate it in the same way that she had operated an electrically powered chainsaw some years before. I then discovered that electric chainsaws don't always have a variable throttle and she had been using the electric saw with the throttle fully depressed. What she didn't know was that the petrol saw had a variable throttle and was thus taking it to a small log at full throttle which was throwing the wood up in the air. So if you dont already know, regulate the throttle use on your petrol saw. 

Thanks .

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.