My first cladding

[gobbypunk]

Hi as it says first cladding milled

[gobbypunk]

The sideways ladder work takes some getting used to

[trigger_andy]

That misalignment on the right would drive me crazy. 

[Squaredy]

I preferred the original.....  

[The avantgardener]

1 hour ago, trigger_andy said:

That misalignment on the right would drive me crazy. 

Me too, the first thing you notice are the imperfections.

When I did my Oak decking at the Beach Hut I fixed it down with 4” brass screws and cup washers I got from a boat builder, all the slots in the screw heads are aligned in the same direction.

[Squaredy]

3 hours ago, gobbypunk said:

 

Hi as it says first cladding milled

 

I was only messing Mark, milling looks good it is not easy to see on a sideways blurry pic though!

[Morion]

Thanks

[openspaceman]

22 hours ago, The avantgardener said:

When I did my Oak decking at the Beach Hut I fixed it down with 4” brass screws and cup washers I got from a boat builder, all the slots in the screw heads are aligned in the same direction.

It was the same at the Mclaren F1 factory when I got a tour, the boss's OCD is what made him successful.

[gobbypunk]

Hi I will be moving the last board over so the lines do match up it was last thing and thinking about it I don’t know why I put it up like that .