Makita DCS520

[Mike Dempsey]

I need a new filter screen part no 021151180 for the above saw. Ordered it from Power Tool Spares about 3 weeks ago believing it wouldn't take too long to get one. Now been told there are none in the country and it will be at least 25th Feb before any are in the country. Are there any recommended Makita dealers that folks could let know so I could try and get the part a bit sooner.

 

Mike

[woody paul]

L&S engineering maybe worth to go.

[spudulike]

Out of stock at L&S but phone them and get them to advise a lead time. They are always pretty good IMO.

[Mike Dempsey]

Think I might have to get on my hands and knees and hunt for the original one on the workshop floor. I was drying it with the airgun after washing it in petrol. The pressure was set too high and it flew away behind the radial arm saw. Lesson learned I think!

[htb]

Probably find a couple of escaped clutches behind there as well.

[woodwizzard]

https://www.sparetoolparts.co.uk/checkout/cart/

 

Same part number, is it the same thing?

[Mike Dempsey]

Hadnt heard of this company Woodwizzard. Found the bit on their  site but I am not going to order unless I know they actually have it and its not a back order.

[shavey]

Can get one next week got a order coming in  from Germany , I can add a pre filter

To the order ,  cost of the filter is £1.87 inc vat

 

Number 51 on the drawing

[Mike Dempsey]

Its the round wire gauze in the carb that I am needing Shavey, and if you could get one next week for me that would be brilliant.

 

Mike

[peatff]

15 minutes ago, Mike Dempsey said:

Its the round wire gauze in the carb that I am needing Shavey, and if you could get one next week for me that would be brilliant.

 

Mike

Just order a Walbro WT carb kit off eBay there should be one in it. £2.79 for a kit from UK supplier. Thought you were after the main pre-filter like Shavey.

Edited February 9, 2019 by peatff
added info