Today's milling

[Josh Purton]

Got the 84” Bar setup but that isn’t even close to milling this one ? don’t really want to buy bigger so going to have to trim one side on the crotch section

[Rough Hewn]

Got the 84” Bar setup but that isn’t even close to milling this one [emoji85] don’t really want to buy bigger so going to have to trim one side on the crotch section

[emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23]
That's a biggy.
[emoji106][emoji106][emoji106]

[Rough Hewn]

Got down to the burr today,


[emoji106]

[muttley9050]

Beautiful

[AJStrees]

Amaze balls as they sometimes say. Very nice indeed, your doing that with a saw and a guide type mill or a big milling machine?

[Rough Hewn]

Amaze balls as they sometimes say. Very nice indeed, your doing that with a saw and a guide type mill or a big milling machine?

With this:
Stihl ms880 powerhead,
84" GB bar
.404 Oregon hyperskip chain
And the 80" horizon panther mill .
Cuts like a dream.
[emoji106]

[difflock]

WoW!

[AJStrees]

With this:
Stihl ms880 powerhead,
84" GB bar
.404 Oregon hyperskip chain
And the 80" horizon panther mill .
Cuts like a dream.
[emoji106]

Massive mate!

That’s great. I am beginning to get the idea that there could be something in this milling. [emoji16]

[Rough Hewn]

With this:
Stihl ms880 powerhead,
84" GB bar
.404 Oregon hyperskip chain
And the 80" horizon panther mill .
Cuts like a dream.
[emoji106]

Can't lift it on my own.
Strictly a two person job now.
[emoji106][emoji106][emoji106]

[muttley9050]

So long story but not been on here much lately. Family issues etc but mostly good now.
Not been doing loads of Milling either but have converted a van into a camper using wood ive milled.
Anyway getting back into Milling lately professionally and as a hobby and also getting back into arbtalk.
So leafs off talk of panther miles on here lately. Ate they better than the granberg alaskans. Advantages, disadvantages?
Think I'll stick with the lucas for big slabs though rather than swinging a massive bar around like above.